Manual Russell Hobbs 23972-56 (page 5 of 96) (All languages)

709927

Zoom out

Zoom in

1/96

DRY IRONING

If you’re going to be dry ironing for 20 minutes or more, empty the reservoir rst, to avoid spontaneous

bursts of steam.

1. Set the steam control to S.

2. Wait till the light goes o, then start ironing.

VERTICAL STEAMING

Remove wrinkles from hanging clothes, hanging curtains, and furnishing fabrics.

• Check that there’s adequate ventilation behind the fabric, otherwise moisture may build up, causing

mildew.

• Check that there’s nothing behind the fabric that may be damaged by the steam.

• Check that pockets, turn-ups, and cus are empty.

• Check that there’s water in the reservoir.

1. Set the temperature control to max. Set the steam control to S.

2. Hold the iron close to (but not touching) the fabric.

3. Press the ~ button (you’re using the “shot of steam” function vertically).

4. Leave 4 seconds between shots, to let the temperature build up.

AFTER USE

1. Set the temperature control to •. Set the steam control to S.

2. Unplug the iron.

3. Open the cover.

4. Hold it over a sink, turn it upside down, and drain the water from the reservoir, via the water inlet.

5. Close the cover.

6. Sit the iron on its heel.

7. Leave it to cool down completely.

8. When it’s cold, wipe o any moisture, and wind the cable round the heel.

9. Store the iron on its heel, to avoid corrosion and damage to the soleplate.

SELF CLEAN

To avoid scale build up, use the self clean function at least monthly in normal water areas, more often in

hard water areas.

Products returned under guarantee with faults due to scale will be subject to a repair charge.

You’ll need a basin or a large bowl to catch the water coming out of the soleplate.

1. Fill the reservoir to the max mark.

2. Set the temperature control to max. Set the steam control to S.

3. Sit the iron on its heel.

4. Put the plug into the power socket and wait till the light goes out.

5. Hold the iron over the basin or bowl with the soleplate down.

6. Press the C, and hold it down.

7. Gently move the iron to and fro, over the basin or bowl.

8. Water and steam will wash scale and dust through the soleplate, and into the sink.

9. When the reservoir is empty, release the C button.

ANTISCALE

The anti-scale agent incorporated in the iron helps prevent the build-up of scale.

Don’t use a descaling solution, or you’ll destroy the anti-scale.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 23972-56 in the language / languages: All languages as an attachment in your email.

The manual is 1,29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Russell Hobbs 23972-56 Manual

Product: