709927

Russell Hobbs 23972-56 Manual

4
Zoom out
Zoom in
Previous page
1/96
Next page
4
FILLING
You may use the iron with tap-water, but if you live in a hard water area, you should use distilled water (not
chemically descaled or softened water).
If you buy distilled water, check that it’s suitable for use in irons.
1. Unplug the iron.
2. Set the temperature control to •. Set the steam control to S.
3. Open the cover.
4. Pour slowly, to let the air in the reservoir escape, otherwise you’ll cause an air lock and the water will
overow.
5. Don’t ll past max, or water will escape in use.
6. Wipe up any spillage.
SWITCH ON
1. Set the temperature control to •. Set the steam control to S.
2. Sit the iron on its heel.
3. Put the plug into the power socket (switch the socket on, if it’s switchable).
4. Turn the temperature control to bring the setting you want next to the mark. The light will come on.
5. When the iron reaches the temperature you set, the light will go o. It’ll then cycle on and o as the
thermostat operates to maintain the temperature.
TEMPERATURE SETTING GUIDE
Label marking Dot setting
j cool – nylon, acrylics, polyester
•
k warm – wool, polyester mixtures
••
l hot – cotton, linen
•••/max
i do not iron
-
If the instructions on the fabric label dier from this guide, follow the instructions on the label.
STEAM IRONING
1. If you intend to use steam, the temperature setting must be S or higher.
2. Set the steam control to the setting you want (S = no steam, # = high).
3. Wait till the light goes o, then start ironing.
SPRAY
Water spotting aects some fabrics. Test this out on a hidden part of the fabric.
1. Lift the iron o the fabric.
2. Aim the spray nozzle at the fabric.
3. Press the ? button – you may have to press it 2 or 3 times to pump water through the system.
SHOT OF STEAM
If you intend to use steam the temperature control must be at ~or higher.
1. Lift the iron o the fabric.
2. Press the ~ button.
3. Leave 4 seconds between shots, to let the temperature build up.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Russell Hobbs 23972-56 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 23972-56 in the language / languages: All languages as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info