705923

Russell Hobbs 22960-56 Manual

3
Zoom out
Zoom in
Previous page
1/52
Next page
3
Read the instructions, keep them safe, pass them on if you pass the appliance on. Remove all packaging
before use.
IMPORTANT SAFEGUARDS
Follow basic safety precautions, including:
This appliance can be used by persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have been
supervised/instructed and understand the hazards involved.
Children must not use or play with the appliance.
Keep the appliance and cable out of reach of children.
Misuse of the appliance may cause injury.
Unplug the appliance before assembly, disassembly, or cleaning.
Don’t leave the appliance unattended while plugged in.
If the cable is damaged, it must be replaced by the manufacturer, its
service agent, or someone similarly qualified, to avoid hazard.
b Do not use this appliance near bathtubs, showers, basins or other vessels containing water.
• Don’t use accessories or attachments other than those we supply.
• Don’t use the appliance for any purpose other than those described in these instructions.
• Don’t use the appliance if it’s damaged or malfunctions.
• Don’t run the motor continuously for more than 5 minutes, it may overheat. After 5 minutes switch
off for at least 5 minutes, to recover. Your mixer will automatically switch off after 5 minutes of
continuous use.
HOUSEHOLD USE ONLY
PARTS
1. Whisk/hook storage slots
2. Turbo button
3. Flange
4. Whisks
5. Hooks
` Dishwasher safe
FITTING THE WHISKS/ HOOKS
1. Switch off (0) and unplug the mixer before fitting or removing the whisks/hooks.
2. Turn each whisk or hook to align the pips on the shaft with the slots in the drive head, then push it
into the drive head till it clicks into place.
3. Fit the whisk/hook with the flange to the drive head with the large hole (fig. A).
4. Use both whisks or both hooks, don’t mix them.
REMOVING THE WHISKS/HOOKS
1. Switch off (0) and unplug the mixer, then shake any excess mixture into the mixing bowl.
2. Hold both whisks/hooks, to prevent them jumping out, and press 5. This will eject them from the
drive heads.
USING THE MIXER
Note: If the blue C button light flashes rapidly at any time, unplug your mixer from the supply socket to
reset it. Plug your mixer back in, then use it normally.
1. Put the plug into the power socket.
GB
DE
FR
NL
IT
ES
PT
DK
SE
NO
FI
RU
CZ
SK
PL
HR
SI
GR
HU
TR
RO
BG
AE
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Russell Hobbs 22960-56 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 22960-56 in the language / languages: All languages as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info