710113
5
Zoom out
Zoom in
Previous page
1/108
Next page
5
GB
DE
FR
NL
IT
ES
PT
DK
SE
NO
FI
RU
CZ
SK
PL
HR
SI
GR
HU
TR
RO
BG
AE
AIR FRYING
1. Unplug your Cyclofry plus.
2. Place the items to be fried into the drum. Don’t overll the drum. Allow enough space for air to circulate and the ingredients to move freely (g A).
3. Fit the lid onto the drum (g. B).
4. Insert the drive shaft into the opening in the bowl (g. C).
5. Lower the drum down until the two holes in the handles t over the two pins in the body of the fryer (g. D). The lid won’t close unless the pins
pass through the holes in the handle.
6. Plug in your Cyclofry plus. The unit will beep and the display will light up briey.
7. Tap the power button (C).
8. The display will light up showing the available programs.
9. Tap the air fry button ( ) button to select the air fry program.
10. The display will alternate between showing the default air fry temperature and the program run time (see DISPLAY ). You can change either of these
settings (see PROGRAM GUIDE).
11. Change the settings as desired or accept the defaults. Tap the power button (C) to start the program.
12. Once the program has nished, the display will go out (except the power button) and the fan will operate for 20 seconds. After 20 seconds, your
Cyclofry plus will beep 5 times and then switch o.
Removing the drum
1. Open the lid. Beware of any escaping steam and hot air. Wear oven gloves or similar.
2. Use the two handles to remove the drum. We recommend using oven gloves because the drum and surrounding areas will be HOT.
3. Press the drum away from you (towards the rear of the unit) then lift the end of the drum that is nearest to you slightly upwards until it clears the
rim of the bowl.
4. Lift the drum clear of the bowl and place it down onto a heat resistant surface.
5. Press down the larger (triangular) release tab and carefully lift the lid o the drum (Fig. H). You don’t have to press both release tabs to remove the
lid.
GRILLING
The grilling function is perfect for grilling, crisping or browning foods. Use as you would a conventional grill by bringing the food close to the heat
using the rack.
1. Unplug your Cyclofry plus.
2. Place the rack in the bowl. Use it in the high position.
3. Plug in your Cyclofry plus. The unit will beep and the display will light up briey.
4. Tap the power button (C).
5. The display will light up showing the available programs.
6. Tap the grill button ( ) to select the grill program.
7. The display will alternate between showing the default grill temperature and the program run time (see DISPLAY ). You can change either of these
settings (see PROGRAM GUIDE).
8. Change the settings as desired or accept the defaults.
9. Tap the power button (C) to start the program.
10. Once the program has nished, the display will go out (except the power button) and the fan will operate for 20 seconds. After 20 seconds, your
Cyclofry plus will beep 5 times and then switch o.
11. Open the lid. Beware of any escaping steam and hot air.
12. You can use the tongs to carefully remove the rack. We recommend you wear oven gloves.
The program can be paused at any time by opening the lid. Close the lid to resume the program.
To stop the program, press the power button (C). The program will stop and the fan will continue to run for 20 seconds. Any program settings will
be lost.
ROASTING/BAKING
1. Unplug your Cyclofry plus.
2. Place the rack in the bowl. Use it in the low position. Food can also be baked directly in the bowl (e.g. cakes).
3. The food can be placed directly onto the rack or into a suitably sized oven-proof container.
4. Plug in your Cyclofry plus. The unit will beep and the display will light up briey.
5. Tap the power button (C).
6. The display will light up showing the available programs.
7. Tap the roast/bake button ( ) to select the roast/bake program.
8. The display will alternate between showing the default roasting/baking temperature and the program run time (see DISPLAY ). You can change
either of these settings (see PROGRAM GUIDE).
9. Change the settings as desired or accept the defaults.
10. Tap the power button (C) to start the program.
11. Once the program has nished, the display will go out (except the power button) and the fan will operate for 20 seconds. After 20 seconds, your
Cyclofry plus will beep 5 times and then switch o.
12. Open the lid. Beware of any escaping steam and hot air.
13. You can use the tongs to carefully remove the rack. We recommend you wear oven gloves.
The program can be paused at any time by opening the lid. Close the lid to resume the program.
To stop the program, press the power button (C). The program will stop and the fan will continue to run for 20 seconds. Any program settings will
be lost.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Russell Hobbs 22100-56 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 22100-56 in the language / languages: All languages as an attachment in your email.

The manual is 2,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info