561285

Russell Hobbs 21510-56 Manual

67
Zoom out
Zoom in
Previous page
1/72
Next page
67
[
13 Don’t fill above the V mark with liquids or soft foods like cheese, or they may miss the blade.
14 Don’t process hard foods – i.e. anything you can’t cut easily with a kitchen knife.
15 Don’t chop big bits – maximum 18mm cubes.
16 Lower the motor unit on to the bowl.
17 Put the plug into the power socket.
C THE SPEED BUTTONS
18 Press the • button for low speed, release it to switch off.
19 Press the •• button for high speed, release it to switch off.
20 Start with 2 or 3 half-second bursts, before operating for longer times (maximum 15 seconds).
21 Generally, large quantities, thick mixes, and a high ratio of solids to liquids suggest longer
timings and slower speeds.
22 Smaller quantities, thinner mixes, and more liquids than solids suggest shorter timings and
higher speeds.
C FINISHED?
23 Lift the motor unit off the bowl.
24 Put a finger on top of the blade unit, to stop it falling out.
25 Tip the processed contents out of the bowl.
26 Alternatively, hold the plastic part of the blade unit, turn it to free it from the spindle flanges,
and lift it straight up and out of the bowl.
27 Fit the storage lid to the bowl.
C CARE AND MAINTENANCE
28 Unplug before dismantling or cleaning.
29 Lift the motor unit off the bowl.
30 Use the tab to pull the splash guard off the motor unit.
31 Hold the plastic part of the blade unit, turn it to free it from the spindle flanges, and lift it
straight up and out of the bowl.
32 Wipe the outside of the motor unit with a clean damp cloth.
33 Hand wash the bowl, lid, blade unit, and splash guard.
34 Clean the inside of the blade unit with a toothpick.
¬ You may wash these parts in the top rack of a dishwasher.
35 If you use a dishwasher, the harsh environment inside the dishwasher will affect the surface
finishes.
36 The damage should be cosmetic only, and should not affect the operation of the appliance.
W
ENVIRONMENTAL PROTECTION
To avoid environmental and health problems due to hazardous substances in electrical
and electronic goods, appliances marked with this symbol mustn’t be disposed of with
unsorted municipal waste, but recovered, reused, or recycled.
instructions
diagrams
1 button
2 motor unit
3 splash guard
4 tab
5 blade unit
6 storage lid
7 bowl
8 spindle
¬ dishwasher – top rack
… 67 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Russell Hobbs 21510-56 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 21510-56 in the language / languages: All languages as an attachment in your email.

The manual is 1,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info