643888
111
Zoom out
Zoom in
Previous page
1/116
Next page
111
C AFTER USE
54 Sit the iron on the base unit.
55 Press the 2 button – it will blink red.
56 Unplug the appliance and let it cool down.
57 Clean the outside surfaces of the appliance with a damp cloth.
58 Remove spots from the soleplate with a little vinegar.
59 Lift the iron off the base unit, wind the steam pipe into its niche above the reservoir and
cable storage, then sit the iron back on the base unit.
60 Open the cable storage, replace the plug and cable, and close the cable storage.
C THE ANTI-SCALE CARTRIDGE
61 To reduce scale build-up, you must change the anti-scale cartridge regularly.
62 After 10 hours of steaming, the O light will glow to tell you that the cartridge needs to be
replaced, and the boiler needs to be descaled.
63 Press the 2 button and hold it down for 5 seconds, to turn off the O light.
C REPLACEMENT CARTRIDGES
64 For replacement cartridges, contact after sales service.
C CHANGING THE CARTRIDGE
65 Unplug the appliance and let it cool down.
66 Lock the iron on top of the base unit.
67 Remove the reservoir.
68 Put a towel over the work surface, to catch drips.
69 You’ll need access to water and a sink or basin.
70 Turn the whole appliance on its side, with the underside towards you.
71 Open the door of the compartment, and pull the anti-scale cartridge out.
72 Fit the new cartridge into the compartment, then close the compartment door.
73 Turn the appliance upright.
74 Descale the boiler every time you replace the cartridge.
C DESCALING THE BOILER
75 Mix 1 tablespoon of white vinegar and 2 tablespoons of warm water in a jug.
76 Unscrew the boiler access knob, to expose the boiler pipe.
77 Pick the base unit up, and empty the boiler into the sink.
78 Turn the appliance on its side, and pour the vinegar/water mix into the pipe.
79 Replace the boiler access knob, and tighten it up.
80 Shake the appliance, to ensure the mixture coats the whole of the inside of the boiler.
81 Leave it for half an hour.
82 Unscrew the boiler access knob, and pour the mixture into the sink.
83 Rinse the boiler with fresh water.
84 Keep rinsing till the water that comes out is clear, free of scale particles, and doesn’t smell of
vinegar.
85 Replace the boiler access knob, and tighten it up.
86 Turn the appliance upright.
87 Replace the reservoir.
88 Wipe up any spillage.
, Products returned under guarantee with faults due to scale will be subject to a repair charge.
W
ENVIRONMENTAL PROTECTION
To avoid environmental and health problems due to hazardous substances in electrical and
electronic goods, appliances marked with this symbol mustn’t be disposed of with unsorted
municipal waste, but recovered, reused, or recycled.
111


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Russell Hobbs 20330-56 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 20330-56 in the language / languages: All languages as an attachment in your email.

The manual is 3,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info