Manual Russell Hobbs 18553-56 (page 4 of 96) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

489791

Zoom out

Zoom in

1/96

C THE LID

13 Open the lid to add ingredients, close it again, to avoid splashing.

C THE BOWL

14 Raise the arm before ﬁtting or removing the bowl.

15 Fit the bowl to the appliance and turn it clockwise.

16 Turn it anti-clockwise to release it.

17 The contents of the bowl will rise when you start the motor – the higher the speed, the more

they’ll rise.

18 Try not to ﬁll the bowl more than about half full (specially when using the whisk).

, Use only the bowl supplied.

C THE ATTACHMENTS

19 Fit and remove the attachments with the appliance switched oﬀ and unplugged, and the arm

raised.

20 Align the slot in the top of the attachment with the lug on the drive shaft, push the

attachment on to the drive shaft, and turn it clockwise.

21 To remove an attachment, push it on to the drive shaft, turn it anti-clockwise, then pull it oﬀ.

22 Lower the arm.

a) Check that the appliance is switched oﬀ (0).

b) Hold the bottom of the appliance.

c) Turn the arm release to U.

d) Press the arm down.

e) Let the arm release go.

f) Let go.

C WHICH SPEED?

attachment speed use

whisk 4-10 + Y beating/aerating cream, egg whites, batter, light mixes

beater 4-6 creaming butter and sugar, medium cake mixes

hook 1-3 heavy mixtures, bread, pastry

N USING THE BLENDER

23 Put a hand on top of the rear drive cover and twist anti-clockwise, to release it and expose

the drive for the jug.

24 Align the spout with the speed control.

25 Lower the jug on to the drive.

26 Turn the jug clockwise till the latches under the jug base engage with the drive, then push

down and keep turning till it locks into place.

27 Put the ingredients into the jug.

28 Don’t ﬁll past the 1.0l mark. If you do, the contents may force the lid oﬀ when you start the

motor.

29 Put the lid on the jug, and press it down.

30 Align the pips on the cap with the slots in the hole, ﬁt the cap, and turn it clockwise to lock it.

31 To add ingredients while the blender is working, remove the cap, pour the new ingredients

through the hole, then replace the cap.

32 Check that the added ingredients don’t push the volume in the jug past the 1.0l mark.

C CARE AND MAINTENANCE

33 Switch the appliance oﬀ () and unplug it.

34 Wipe the outside of the motor unit with a clean damp cloth.

35 Wash the removable parts in warm soapy water, rinse well, drain, and air dry.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 18553-56 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Russell Hobbs 18553-56 Manual

Product: