Manual Russell Hobbs 18553-56 (page 3 of 96) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

489791

Zoom out

Zoom in

1/96

12 Don’t use accessories or attachments other than those we supply.

13 Don’t use the appliance for any purpose other than those described in these instructions.

14 Don’t operate the appliance if it’s damaged or malfunctions.

15 If the cable is damaged, it must be replaced by the manufacturer, its service agent, or

someone similarly qualiﬁed, in order to avoid hazard.

household use only

C SWITCH ON

1 Sit the motor unit on a dry, ﬁrm, level surface, near a power socket.

2 Check that the speed control is set to 0.

3 Put the plug into the power socket.

C SPEED CONTROL

4 Turn the speed control to the speed you want (1 = low, 10 = high).

5 Turn the speed control back to 0 to turn the motor oﬀ.

6 Generally, large quantities, thick mixes, and a high ratio of solids to liquids suggest longer

timings and slower speeds.

7 Smaller quantities, thinner mixes, and more liquids than solids suggest shorter timings and

higher speeds.

Y PULSE

8 Turning the speed control anti-clockwise to Y will give you a short burst at high speed. In

this direction, the knob is spring-loaded. When you let go, it’ll return to 0.

v USING THE STAND MIXER

9 The springs in the arm are quite powerful, so:

a) Check that the appliance is switched oﬀ (0)

b) Hold the bottom of the appliance. Keep clear of the top of the arm.

c) Turn the arm release to U. The arm will move to the raised position.

d) Let go.

C THE SPLASH GUARD

10 Switch oﬀ, unplug, and raise the arm before ﬁtting/removing the splash guard.

11 The splash guard ﬁts over the end of the drive shaft and drive:

a) Align the latches on the splash guard with those on the drive.

b) Turn the splash guard 3cm clockwise.

c) Lift the splash guard towards the drive.

d) Turn the splash guard 3cm anti-clockwise.

e) This should engage the latches on the splash guard with those on the drive.

12 To remove the splash guard:

f) Turn the splash guard 3cm clockwise.

g) Move the splash guard down, away from the drive.

instructions

diagrams

1 speed control

2 arm release

3 motor unit

4 rear drive cover

5 arm

6 front drive cover

7 splash guard

8 bowl

9 lid

10 hook

11 whisk

12 beater

13 slot

14 lug

15 latch

16 drive

17 drive shaft

18 rear drive

19 jug base

20 blade unit

21 seal

22 jug

23 handle

24 lid

25 pips

26 cap

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 18553-56 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Russell Hobbs 18553-56 Manual

Product: