489817

Russell Hobbs 18137 Manual

10
Zoom out
Zoom in
Previous page
1/12
Next page
10
check the fibre filter
92 While the bin is out, check the fibre filter.
93 It’s unlikely to get terribly dirty, but if you want to clean it, pick out of its housing
with a fingernail, and wash it in warm, soapy water.
94 Leave it to air dry for 24 hours before replacing it.
general cleaning
Switch the cleaner off and unplug it before cleaning.
Don’t put any part of the cleaner in a dishwasher.
Don’t use harsh or abrasive cleaning agents or solvents.
timing
The amount and frequency of cleaning depends on the amount of use the cleaner gets,
and the amount of time you can spare. Basically, the better you look after it, the longer
it’ll last. Keep an eye on it as you use it. Clean the filters when you empty the bin. If
anything else needs cleaning, do it there and then, don’t put it off, in case you forget.
external surfaces
Wipe external surfaces with a damp cloth. A dab of washing-up liquid should remove
stubborn stains, but clean it off afterwards, or it may itself cause staining.
tools
Wipe with a damp cloth, or hand wash in warm soapy water. Rinse to remove the soap,
and air dry before using them.
hose
Wipe with a damp cloth. You can use a dab of washing-up liquid to remove stubborn
stains. Clean off all trace of the washing-up liquid, and check it’s dry before refitting.
brush roller
String and the like may wind round the brush roller. Upend the cleaner, and snip any
string, etc. carefully with scissors. Don’t cut the bristles.
blockages
No matter how careful you are, sooner or later you’re going to block the cleaner.
Don’t worry, we thought of that, we’ve fitted the motor with a temperature cut-out. A
blockage will trigger the cut-out , and the motor will stop.
don’t panic!
If the motor cuts out while you’re vacuuming, don’t panic, it’s not the end of the world,
you’ve probably just blocked it up.
1 Switch off, unplug, and leave the cleaner for half an hour to cool down fully. This’ll
also reset the cut-out.
2 Spread a newspaper on the floor, you’re going to make a mess.
… 10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Russell Hobbs 18137 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 18137 in the language / languages: English as an attachment in your email.

The manual is 0,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info