489817
8
Zoom out
Zoom in
Previous page
1/12
Next page
8
plug in
caution If you’ve inadvertently kicked the switch, the cleaner may
start up when you plug it in – press and release the switch
with your toe to switch it off.
49 Turn the bottom cable hook upwards, to release the cable from the
rear of the cleaner.
50 Use a socket near the area to be cleaned, plug in, and switch the socket on, if it’s
switchable.
press the pedal
51 Stand behind the cleaner, press the pedal down with your toe, ease the handle back,
then take your toe off the pedal.
52 The cleaner is now ready to use upright.
switch on
53 Press the switch with your toe to switch the cleaner on.
cleaning
54 Move the cleaner over the floor, cleaning a small area at a time.
55 When you change areas, overlap the previous area, to avoid missing anything.
switch off
56 If you’ve finished, if you want to change the brush height for a different floor
covering, if you want to change from using it upright to using the hose, or if you just
want to stop for a cup of tea, press and release the switch with your toe, to turn the
motor off, then push the handle forward till it’s fully upright, to lock the base.
changing the floor type
57 Switch off and adjust the brush height control before moving the cleaner to a
different floor covering.
58 Using the “wrong” setting won’t do any harm, but you won’t get the performance
you would with the correct setting.
using the tools
59 Press and release the switch, to switch the motor off.
60 Push the handle forward till its fully upright, and the pedal
clicks into position to hold it there.
61 Move the brush height control fully over to the long pile 3
setting, to prevent the brush hitting the surface its sitting on.
62 Pull the hose end gently out of the base tube.
63 Pull the hose out of the hose support.
64 Either fit the tool to the hose end, or fit the extension tube to
the hose end, then fit the tool to the extension tube.
65 Press and release the switch with your toe to switch the cleaner on.
finished cleaning?
66 Press and release the switch with a toe, to turn the motor off.
67 Push the handle forward, to lock the base.
68 Unplug the cleaner (switch the socket off first, if its switchable).
69 Turn the bottom cable downwards, and wind the cable round both cable hooks.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Russell Hobbs 18137 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 18137 in the language / languages: English as an attachment in your email.

The manual is 0,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info