489817
5
Zoom out
Zoom in
Previous page
1/12
Next page
5
fit the filter to the bin
19 Hold the lid handle in one hand, hold the bin handle in the other.
20 Turn the bin to bring the arrow on the bin from the closed padlock L to the open
one U.
21 Lift the lid off the bin, then set the bin down for the moment.
22 Turn the bin lid upside down.
23 Align the bayonet fittings in the end of the HEPA filter with those in the centre of the
lid.
24 Turn the filter about a centimetre clockwise, to lock it into the lid.
25 Turn the lid the right way up.
26 Align the arrow on the bin with the open padlock U on the lid.
27 Lower the filter into the bin – you may have to jiggle it about a bit, to fit the bottom
of the filter over the cone in the bottom of the bin.
28 Turn the lid, till the arrow is at the closed padlock L.
fit the bin to the cleaner
29 Fit the fibre filter into the space at the top of the
base. There’s a cut-out at the front, and a hole at
one side, so it only fits one way.
30 Tilt the top of the bin forward.
31 Put the bottom of the bin into the space at the
top of the base, on top of the fibre filter.
32 Straighten the bin, and push the bin lid against
the mount at the top of the pillar.
33 You’ll hear the bin release button click into place,
locking the bin lid to the mount.
34 The cleaner is now ready for use.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Russell Hobbs 18137 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 18137 in the language / languages: English as an attachment in your email.

The manual is 0,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info