489931
7
Zoom out
Zoom in
Previous page
1/32
Next page
GENERAL WARNINGS
SAFETY AND ACCIDENT PREVENTION INSTRUCTIONS
Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or
serious injury. Save all warnings and instructions for future referen-
ce.
The term "power tool" in warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
Work area safety
Keep work area clean and well lit. Cluttered and dark areas invite to
accidents.
Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create
sparks which may ignite dust or fumes. Keep children and bystan-
ders away while operating a power tool. Distractions can cause you
to lose control.
Electrical safety
Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will reduce risk of elec-
tric shock. Avoid body contact with grounded surfaces such as
pipes, radiators, ranges and refrigerators. There is an increased risk
of electric shock if your body is grounded.
Do not expose power tools to rain or wet conditions. Water entering
a power tool will increase the risk of electric shock.
Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp
edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an extension cord suita-
ble for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric
shock.
If operating a power tool in a damp location is unavoidable, use a
residual current device (RCD) protected supply.
Use of an RCD reduces the risk of electric shock.
Personal safety
Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired
or under the influence of drugs, alcohol or medication. A moment of
inattention while operating power tools may result in serious perso-
nal injury. Use safety equipment. Always wear eye protection. Safety
equipment such as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions will reduce per-
sonal injuries.
Prevent unintentional starting. Ensure the switch is in the off-position
before connecting to power source and/or battery pack, picking up
or carrying the tool. Carrying power tools with your finger on the
switch or energising power tools that have the switch on invites acci-
dents. Remove any adjusting key or wrench before turning the power
tool on. A wrench or a key left attached to a rotating part of the power
tool may result in personal injury. Do not overreach. Keep proper foo-
ting and balance at all times. This enables better control of the power
tool in unexpected situations. Dress properly. Do not wear loose clo-
thing or jewellery. Keep your hair, clothing and gloves away from
moving parts.
Loose clothes, jewellery or long hair can be caught in moving parts.
If devices are provided for connecting dust extraction and collection
facilities, ensure these are connected and properly used. Use of
these devices can reduce dust related hazards.
SPECIFIC USE
Do not force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and safer at
the rate for which it was designed. Do not use the power tool if the
switch does not turn on and off. Any power tool that cannot be con-
trolled with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or the battery pack
from the power tool before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measu-
res reduce the risk of starting the power tool accidentally.
Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to ope-
rate the power tool. Power tools are dangerous in the hands of untrai-
ned users. Maintain power tools. Check for misalignment or binding
of moving parts, breakage of parts and any other condition that may
affect the power tools operation. If damaged, have the power tool
repaired before use. Many accidents are caused by poorly maintai-
ned power tools. Keep cutting tools sharp and clean. Properly main-
tained cutting tools with sharp cutting edges are less likely to bind
and are easier to control. Use the power tool, accessories and tool
bits etc. in accordance with these instructions and in the manner
intended for the particular type of power tool, taking into account the
working conditions and the work to be performed. Use of the power
tool for operations different from those intended could result in a
hazardous situation. Have your power tool serviced by a qualified
repair person using only original spare parts. This will ensure that the
safety of the power tool is maintained.
TYPE
TR101
INPUT POWER 500
OUTPUT POWER 255
IDLE SPEED 0 ÷ 3000
DRILLING STEEL MAX 10
DRILLING WOOD MAX 16
SCREWING INTO WOOD MAX 6
SCREWING INTO SHEET METAL MAX 5.3
COLLAR DIAMETER 43
CORNER DIMENSION 22,5
CHUCK OPENING WIDTH 1-10
THREAD OF WORK SPINDLE 3/8’’-24UNF
WEIGHT 1,6
TECHNICAL DATA ENGLISH
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rupes TR101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rupes TR101 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info