489903

Rupes RP84 Manual

11
Zoom out
Zoom in
Previous page
1/31
Next page
11
GUARANTEE
All tools manufactured by RUPES Spa are guaranteed for 12 months from the date of pur-
chase against fabrication and material defects.
All tools must be used only with RUPES original accessories and spare parts: we refuse all
responsibility for damages or accidents caused by non-observance of this rule which will
also cause the termination of the guarantee.
The guarantee will no longer be valid if the instructions contained in this booklet are not
followed, if the tool is used for purposes other than that for which it is intended, if it is di-
smantled, interfered with in any way or damaged due to neglect.
The guarantee will be made valid by filling-in the form on the inside back cover of
this instruction booklet.
If the tool is found to be defective or malfunctions, it should be returned carriage free in
one piece in its original packing together with the guarantee certificate to the manufacturer
or to one of the Assistance Centres listed in the appendix to this booklet.
The guarantee does not automatically imply replacement of the tool.
RUPES Spa reserves the right to make any technical or design modification to its pro-
ducts without prior notice. The manufacturer is not liable for any print errors. This do-
cument voids and replaces previous ones.
Year of affixing to the mark: 96
We declare on our responsibility that the represented hand-held electric
motor operated tool, in protection class II, is in conformity with the
Essential Requirements of Safety of the following Directives:
998/37/CE Machinery
2006/95/CE Low Tension
2004/108/CE Electromagnetic Compatibility
The tests have been carried out in accordance with the European
Harmonised Regulations in force
Low Tension:
EN 60745-1 Safety of hand-held electric motor operated tools
EN 60745-2-15Particular requirements for edge trimmers
EN ISO 3744 + UNI EN ISO 11203 Tests and limits relative to
propagated noise
UNI EN 28662 + UNI EN ISO 5349 Measuring of the vibrations on the
handle
Electromagnetic compatibility:
EN 55014-1+ EN 55014-2; EN 61000-3-2 + EN61000-3-3
Electromagnetic fields:
EN 50366
IL PRESIDENTE
G. Valentini
S.p.A
CONFORMITY DECLARATION
TOOL IDENTIFICATION PLATE
POSITION AND MEANING OF INFORMATION
1. Type of tool.
2. Nominal working voltage in Volts (V).
3. Working frequency in Hertz (Hz).
4. Absorbed current in Amperes (A). Ensure that the power supply to which the tool is
connected can easily tolerate the indicated current as a minimum.
5. Absorbed power expressed in Watts (W).
6. Tool code or serial number.
7. Technical data of the tool.
8. Maximum rpm
9. The double square indicates that the tool is doubly insulated and therefore does
not require earthing through the power supply cable.
10. Read all these instructions before operating this product and save these
instructions.
11. Personal safety devices.
12. At the end of its useful life, the product, pursuant to European Directive
2002/96/CE (RAEE) + 2003/108/CE and its implementation in national law, must
not be released into the environment or thrown away as domestic waste, but must
be disposed of at authorised recycling centres (contact the relevant local
authorities for a list of places where the product may be disposed of according to
the law).Disposing of the product correctly contributes to protecting human health
and safeguarding the environment. Any illegitimate disposal of the product will be
punishable by law.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rupes RP84 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rupes RP84 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info