Manual Rupes RP84 (page 9 of 31) (English, German, Dutch, French, Italian, Spanish)

489903

Zoom out

Zoom in

1/31

PARTS OF THE TOOL

1 - Identification plate

2 - ON-OFF switch

3 - Handle

4 - Auxiliary handle

5 - Auxiliary handle fixing screw

6 - Slot for accessories

7 - Plate with straight or adjustable guide or roller

8 - Depth guide black plate

9 - Positioning device for trimming and relative fixing screws

10 - Plate with guide slot cutting

11 - Guide for slot cutting

12 - Wide cutter guide

13 - Cutter

14 - Collet shaft

15 - Tool collet

16 - Collet tightening nut

17 - Motor ventilation slots

18 - Filter support grid

19 - Dust filter

20 - Spanners

STARTING UP

Before starting-up the tool, ensure that:

- the packaging is complete and does not show signs of having been da-

maged during storage or transport;

- the tool is complete; check that the number and type of components

comply with that reported in this instruction booklet;

- the power supply and socket outlet can support the load reported in the

table and that indicated on the tool identification plate reproduced and

explained on page 11.

ASSEMBLING THE TOOL

- Assemble the auxiliary handle (4) using the fixing screw (5);

- place the dust filter (19) in the grid (18) and mount the unit on the tool

body;

- assemble the accessories required for the operation to carry out.

ASSEMBLING THE CUTTERS

- The cutters should be fitted before or after the accessories depending

on which accessories are used;

- slacken the lock nut (16) and insert the tang of the cutters in the collet

(15);

- keep the collect (14) still using the spanner supplied and tighten the lock

nut (16) ensuring that the cutters is centred and tight.

CUTTERS REPLACEMENT

- Slacken the lock nut (16) using the spanner supplied, keeping the collet

shaft still;

- replace the cutters and re-tighten.

FITTING ACCESSORIES

FOR TRIMMING EDGES

- Assemble accessories (7) and (8) in the slots (6) and fix them in position

using the spring washer and screws supplied;

- use either the straight guide or roller for straight, curved for irregular ed-

ges;

- adjust the cutters using adjuster (9) and tighten the relative screws.

FOR CUTTING SLOTS

- If necessary, replace the cutter guide on the guide plate (7) with one of

large diameter (12);

- fit a cutter of suitable dimensions;

- if necessary, fit and position the guide and adjustment device (11).

USABLE WORKING TOOLS

Cutters with 6 mm Ø.

BEFORE STARTING THE TOOL

Ensure that:

- the power supply conforms with the characteristics of the tool;

- the power supply cable and plug are in perfect condition;

- the ON/OFF switch works properly though with the power supply di-

sconnected;

- all the parts of the tool have been assembled in the proper manner and

that there are no signs of damage;

- the ventilation slots are not obstructed (17);

- the cutters is properly fixed (13).

STARTING AND STOPPING

- Starting

: push the slide of the ON/OFF switch (2) forward.

- Stopping: return the switch (2) to its original position.

TEST RUN

Start the tool and check that there is no vibration and that the cutters is

centred.

Otherwise switch-off the tool immediately and eliminate the cause.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Rupes RP84 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Rupes RP84 Manual

Product: