489883

Rupes MX800 Manual

9
Zoom out
Zoom in
Previous page
1/53
Next page
SAFETY INSTRUCTIONS FOR ELECTRIC
STIRRER MACHINES
WARNING Read and understand all instruc-
tions. Do not attempt to use the tool until you
have read thoroughly and understand the opera-
tor’s manual completely. Pay close attention to
the safety rules including Dangers, Warnings and
Cautions. If you use this tool properly and only for
what it is intended. Failure to follow all instruc-
tions listed below may result in electrical shock,
damage to drilling system and even personal
injury.
W
ARNING The purpose of safety symbols is
to attract the user’s attention to possible dangers.
The safety symbols and the explanations with
them deserve your careful attention and under-
standing.
The safety warnings do not by themsel-
ves eliminate any danger
.
The instructions or
warnings they give are not substitutes for proper
accident prevention measures.
SAFETY SYMBOLS
CAUTION: indicates a potentially hazardous
situation which, if not avoided may result in minor
or moderate injury. It may also be used to alert
against unsafe practices that may cause proper-
ty damage.
DANGER
: indicates an imminently hazardous
situation which if not avoided will result in death
or serious injury.
W
ARNING: indicates a potentially hazardous
situation which if not avoided will result in death
or serious injury.
BEFORE USING THIS T
OOL
WARNING: Some dust created by the power
sanding, sawing, grinding, drilling and other con
-
struction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
- Lead from lead-bases paints,
MIXER
INSTRUCTION MANUAL
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
SPECIFICATIONS 800W 1100W 1300W 1600W
Power Input 800W 1100W 1300W 1600W
Voltage 230V / 50Hz o 115V / 60 Hz
Output (N-m) 9,8 13,48 14,7 28
Number of Gears 1 1 2 2
No Load Speed 750 250~700 150~400/250~700 180~350/280~550
Protection Double Insulation / Class 2
Coupling Thread M14 - 2.0
Mixing Paddle Max.
Diameter 105 mm 120 mm 140 mm 160 mm
Electronic Speed
Control √ √ √
Weight 2,9 kg 3,6 kg 4,1 kg 5,6 kg
A-weighed noise level 82db(A) 84db(A) 85db(A) 89db(A)
Sound pressure level 94db(A) 96db(A) 97db(A) 101db(A)
Hand-Arm-Vibration 0.4m/s
2
0.7m/s
2
1.5m/s
2
0.5m/s
2
English
9
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rupes MX800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rupes MX800 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info