Manual Rupes LHR150N (page 6 of 19) (English, German, Dutch, French, Italian, Spanish)

489880

Zoom out

Zoom in

1/19

GENERAL WARNINGS

SAFETY AND ACCIDENT PREVENTION INSTRUCTIONS

The safety and accident prevention instructions are reported in the “SAFETY INSTRUC-

TION” booklet which forms an integral part of these documents; the operating instructions

indicate the additional information required specifically for use of the tool. Never use the

tools without the safety guards. Any operations carried out on the tool must be effected with

the tool disconnected. Before starting the tool, ensure that it is held tightly and not in

contact with the work surface. The electric tool must be connect to a suitable dust extrac-

tion unit and applicable safety regulations must be observed if dusts dangerous to health

are likely to occur during sanding. Due to risks that may arise during sanding, we recom-

mend the constant use of P.S.D. (personal safety devices such as gloves, headphones,

goggles, face masks, etc.) according to laws in force to prevent or reduce accident proba-

bility.

Warning! Carry out the lubrication process outlined on page 7, in the maintenance

paragraph. The appliance continues to work for a few seconds after it has been swit-

ched off.

CORRECT USAGE

The sanders are designed for sanding wood, plastic, composite materials, paint/varnish, fil-

ling material and similar materials. Metal and materials with an asbestos content must not

be processed with these tools. The tools must not be damp nor operated in a damp envi-

ronment for electrical safety reasons. The tools may only be used for dry sanding. Make

sure the work piece is sufficiently fastened. In the event of improper use, the user is fully

liable for any damages or accidents.

PARTS OF THE TOOL

1 - On/off switch

2 - Tool body

3 - Compressed air connection with 1/4” thread

4 - Polishing pad (not supplied)

5 - Speed control

STARTING UP

Before starting-up the tool, ensure that:

- the packaging is complete and does not show signs of having been damaged during sto-

rage or transport;

- the tool is complete; check that the number and type of components comply with that re-

ported in this instruction booklet;

- the available compressed air production and distribution plant is capable of satisfying the

requirements reported on the tool’s identification plate reproduced and explained on

page 7.

ASSEMBLING THE TOOL

Assemble the compressed air connection (not supplied) by screwing it into its seating (3).

COMPRESSED AIR CONNECTION

The tool is supplied without the compressed air connection. The user can use either a quick

release coupling: or hose type connection according to his needs purke that have an hole

air passing mm 8.

MOUNTING AND REMOVING THE BACKING PAD

- mount the disc pad on the tool shaft;

- lock the spindle with spanner and unscrew the pad.

ASSEMBLING THE POLISHING PAD

Press the polishing pad to attach it to the back-up pad.

BEFORE STARTING THE TOOL

Ensure that:

- the compressed air feed line and connection are in perfect working order;

- the start lever is working properly. This must be done with the air supply switched off;

- all the components of the tool are mounted correctly and do not show any signs of da-

mage.

STARTING AND STOPPING

- Starting: push the control lever (5) forward towards the body ofthe tool and keep it pressed.

- Stopping: release the control lever.

TEST RUN

Start the tool and check that there are no unusual vibration, or dismatching of disc pad with

polishing pad. Otherwise switch-off the tool immediately and eliminate the cause.

TYPE LHR 150N

WORKING PRESSURE bar 6

AIR CONSUPTION l/min 420

SPEED CONTROL ’ YES

ROTATION min 8700

ORBITAL DIAMETER mm 10

DISC PAD DIAMETER mm 125

WEIGHT Kg 1,185

TECHNICAL DATA ENGLISH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Rupes LHR150N in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Rupes LHR150N Manual

Product: