Manual Rupes GTV20 (page 7 of 108) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

489871

Zoom out

Zoom in

1/108

English - 7 -

IMPORTANT SAFETY INSTRUCTIONS

This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this

plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug.

If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.

READ THESE INSTRUCTIONS

Warning: Extreme care should be taken when stripping paint. The peelings, residue and vapors of paint may con-

tain lead, which is poisonous. Any pre-1977 paint may contain lead and paint applied to homes prior

to 1950 is likely to contain lead. Once deposited on surfaces, hand to mouth contact can result in the

ingestion of lead. Exposure to even low levels of lead can cause irreversible brain and nervous system

damage; young and unborn children are particularly vulnerable.

Before beginning any paint removal process you should determine whether the paint you are removing

contains lead. This can be done by your local health department or by a professional who uses a paint

analyzer to check the lead content of the paint to be removed. LEAD-BASED PAINT SHOULD ONLY BE

REMOVED BY A PROFESSIONAL AND SHOULD NOT BE REMOVED USING A HEAT GUN.

Persons removing paint should follow these guidelines:

1. Move the work piece outdoors. If this is not possible, keep the work area well ventilated. Open the windows and

put an exhaust fan in one of them. Be sure the fan is moving the air from inside to outside.

2. Remove or cover any carpets, rugs, furniture, clothing, cooking utensils and air ducts.

3. Place drop cloths in the work area to catch any paint chips or peelings. Wear protective clothing such as extra

work shirts, overalls and hats.

4. Work in one room at a time. Furnishings should be removed or placed in the center of the room and covered.

Work areas should be sealed off from the rest of the dwelling by sealing doorways with drop cloths.

5. Children, pregnant or potentially pregnant women and nursing mothers should not be present in the work area

until the work is done and all clean up is complete.

6. Wear dust respirator mask or a dual filter (dust and fume) respirator mask which has been approved by the

Occupational Safety and Health Administration (OSHA), the National Institute of Safety and Health (NIOSH),

or the United States Bureau of Mines. These masks and replaceable filters are readily available at major hard-

ware stores. Be sure the mask fits. Beards and facial hair may keep masks from sealing properly. Change filters

often. DISPOSABLE PAPER MASKS ARE NOT ADEQUATE.

7. Use caution when operating the heat gun. Keep the heat gun moving as excessive heat will generate fumes which

can be inhaled by the operator.

8. Keep food and drink out of the work area. Wash hands, arms and face and rinse mouth before eating or drink-

ing. Do not smoke or chew gum or tobacco in the work area.

9. Clean up all removed paint and dust by wet mopping the floors. Use a wet cloth to clean all walls, sills and any

other surface where paint or dust is clinging. DO NOT SWEEP, DRY DUST OR VACUUM. Use a high phosphate

detergent or trisodium phosphate (TSP) to wash and mop areas.

10.At the end of each work session put the paint chips and debris in a double plastic bag, close it with tape or twist

ties and dispose of properly.

11.Remove protective clothing and work shoes in the work area to avoid carrying dust into the rest to the dwelling.

Wash work clothes separately. Wipe shoes off with a wet rag that is then washed with the work clothes. Wash

hair and body thoroughly with soap and water.

SAVE THESE INSTRUCTIONS

WELDY.book Seite 7 Mittwoch, 17. Mai 2006 1:02 13

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Rupes GTV20 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Rupes GTV20 Manual

Product: