762651
14
Zoom out
Zoom in
Previous page
1/141
Next page
10
ends of the dust container – Fig.21.
• Lift off the (H)EPA filter cassette (11) – Fig.22.
• Turn the container over and place the accessory* (15b) in the slot of the dust separator support bolt (14)
– Fig.25.
• Open by turning in the unlocking direction ( ) – Fig.26.
• Lift off the dust separator support (13) – Fig.27.
• Unclip then lift off the dust separator (12) taking care to do so in the unlocking direction ( ) – Fig.28
• Then place the dust container (10), the dust separator support (13) and the dust separator (12) in tap or
soapy water – Fig. 29.
• Dry them with a cloth – Fig. 30.
• Once it’s dry, replace then clip the dust separator (12) onto the dust separator support (13), following
the locking direction ( ) – Fig.31.
• Put them back on the dust container (10) – Fig.32.
• Place the accessory* (15b) in the slot of the dust separator support bolt (14) – Fig.25.
• Close following the locking direction ( ) – Fig.33.
• Clip the (H)EPA filter cassette (11) (black foam filter (11a) + (H)EPA filter (11b) ) in the container – Fig.24.
• Put the cover back (10b) – Fig.18-19 – and put the dust container back (10) in its compartment (6) –
Fig.20.
4. CLEANING THE (H)EPA FILTER (11b)
The air we breathe contains particles that may be allergens: mite larvae and droppings, mould, pollen,
smoke and animal residues (hair, skin, saliva, urine). The smallest particles penetrate deep into the res-
piratory system where they can cause inflammation and lung impairment.(H)EPA filters (High Efficiency
Particulate Air) are used to filter out the smallest particles. With the (H)EPA filter, the air released back
into the room is healthier than the air that is vacuumed.
Important!
Clean the (H)EPA filter cassette (11): black foam filter (11a) and (H)EPA (11b) filter every month.
• Remove the flexible hose (16) from the vacuum inlet (7) - Fig.2.
• Lift off the dust container (10) from its compartment (6) using the container’s unlocking clip (10a) –
Fig.13-14.
• Pull simultaneously on the opening clips for the (H)EPA filter cassette (10d) - Fig.21.
• Separate the black foam filter (11a) from the (H)EPA filter (11b) - Fig.22.
• Turn the (H)EPA filter over (11b), and give it a tap over a dustbin - Fig.34.
• Then scrape the filter with the accessory* (15b) under some warm water, then allow the (H)EPA filter to
dry for 24hours - Fig.35.
• Once it’s completely dry, assemble the (H)EPA filter cassette (11): black foam filter (11a) and
(H)EPA filter (11b) under the dust container (10) - Fig.24, then put the dust container back in its compart-
ment (6) - Fig.20.
• Make sure that the (H)EPA filter (11b) is completely dry before putting it back in the appliance.
Important! Make sure that the whole filtration system is correctly in place before starting the appliance.
5. REPLACING THE FILTRATION SYSTEM (Ref. ZR0047 01)
• Remove the flexible hose (16) from the vacuum inlet (7) - Fig.2.
• Lift off the dust container (10) from its compartment (6) using the container’s unlocking clip (10a) –
Fig.13-14.
5.1. HEPA FILTER CASSETTE (11)
• Pull simultaneously on the opening clips for the (H)EPA filter cassette (10d) – Fig.21.
• Separate the black foam filter (11a) from the (H)EPA filter (11b) - Fig.22.
• If the (H)EPA filter cassette (11) (black foam filter (11a) and (H)EPA filter (11b)) is damaged, throw it into
the bin - Fig.36 and replace it with a new (H)EPA filter cassette (ref. ZR0047 01).
• Assemble the (H)EPA filter cassette (11): black foam filter (11a) and (H)EPA filter (11b) under the con-
tainer
(10) - Fig.24 then put the dust container back in its compartment (6) - Fig.20.
5.2. FOAM MICROFILTER (9)
• Remove the foam microfilter* (9) - Fig.37.
Depending on models: either equipment specific to certain models or available as an optional accessory.
RO_ASPIRATEUR_MINI-SPACE-CYCLONIC_902827_902827 16/06/11 11:08 Page10
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rowenta RO3321 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rowenta RO3321 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 11,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info