762651
13
Zoom out
Zoom in
Previous page
1/141
Next page
9
PLUGGING IN THE POWER CORD AND SWITCHING ON THE VACUUM CLEANER
• Unwind the power cord completely, plug in your vacuum cleaner - Fig.6 and press on the
On/Off button (2) - Fig.7.
• Set the suction power using the manual power switch on the power nozzle: open the regulator cover to
reduce the suction power manually, e.g.: on fragile surfaces… - Fig.8.
STORING AND CARRYING THE APPLIANCE
• After use, switch off your vacuum cleaner by pressing the On/Off switch (2) and unplug it - Fig.9.
Rewind the power cord by pressing the power cord rewind button (3) - Fig.10.
• In the vertical position, place the nozzle (19) in its storage compartment underneath the appliance (1b) -
Fig.11.
• In the horizontal position, place the nozzle (19) in its storage compartment at the back of the appliance
(1a)- Fig.12.
• Use the carrying power nozzle to carry your vacuum cleaner easily (5).
V. CLEANING AND MAINTENANCE
Important: Always switch off and unplug your vacuum cleaner before servicing or cleaning it.
Important: Whenever cleaning the dust container, make sure you’re standing over a dustbin.
REMOVE THE DUST CONTAINER (10)
• Remove the flexible hose (16) from the vacuum inlet (7) - Fig.2.
• Take out the dust container (10) from its compartment (6): press the dust container release clip (10a) -
Fig.13, then remove the container - Fig.14.
1. EMPTY THE DUST CONTAINER
Important: empty the dust container (10) each time you finish using the vacuum cleaner.
• Lift off the cover (10b).
• Press the push button for opening the cover (10c) – Fig.15, then remove the cover – Fig.16.
• Empty the container over a dustbin – Fig.17.
• Make sure that there is no more dust left in the container.
• Put the cover back on (10b) : place the sprockets in the notches – Fig.18, then close the cover – Fig.19.
• Put the container back in its compartment (6) – Fig.20.
2. CLEAN THE BLACK FOAM FILTER (11a)
Important!
To get the most out of your vacuum cleaner, make sure you wash the foam (11a) after each time you
empty the dust container (10).
• Pull simultaneously on the opening clips for the (H)EPA filter cassette (10d) – Fig.21.
• Separate the black foam filter (11a) from the (H)EPA filter (11b) – Fig.22.
• Wash the black foam filter (11a) in tap water, wring it like a sponge then dry it for 12 hours – Fig.23.
• Once it is completely dry, assemble the (H)EPA filter cassette (11) : the black foam filter (11a) and
(H)EPA filter (11b) under the dust container (10) – Fig.24, put the cover back on – Fig.19, then put the dust
container back in its compartment (6) – Fig.20.
Important!
The black foam filter (11a) must be put back in the appliance when it is completely dry.
You can still use your vacuum cleaner whilst the black foam filter is drying (11a) by using the replace-
ment black foam filter(11a (b)).
3. CLEANING THE DUST CONTAINER (10) AND THE AIR/ DUST SEPARATOR (12)
Important: clean the dust container (10) and the dust separator (12) every month.
• Take the lid off (10b) using the push button for opening the cover (10c) – Fig.15-16.
• Empty the dust container over a dustbin – Fig.17.
• Unclip the (H)EPA filter cassette (11), by pulling simultaneously on the opening clips (10d) located at the
EN
RO_ASPIRATEUR_MINI-SPACE-CYCLONIC_902827_902827 16/06/11 11:08 Page9
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rowenta RO3321 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rowenta RO3321 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 11,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info