762912

Rowenta RH8462 Manual

16
Zoom out
Zoom in
Previous page
1/180
Next page
15
Using the tool provided with the appliance (15), press in the two latches located on each side of the
lower side of the Delta head (fig.7). Lift the trap located on top of the electro-brush (fig.8). Remove the
electro-brush and its lateral bearing in order to clean them (fig.9). Carefully remove any threads, hair,
fur, etc. from the electro-brush. Once clean, replace the electro-brush and its lateral bearing (fig.11),
then replace the trap over it (fig.12). Finally, using the tool provided with the appliance, close both
latches (fig.13).
FOR YOUR SAFETY
• Do not touch any rotating parts before you turn off and unplug the vacuum cleaner.
• Do not use the appliance on wet surfaces.
• Do not immerse the appliance in water.
ELECTRO-BRUSH MALFUNCTION
The electro-brush does not function properly or makes an unusual sound
• Either the rotating brush or the axis is blocked: turn off the appliance and clean them.
• The brush is worn out: visit an authorized Service Center in order to have the brush changed.
• The belt is worn out: if the belt makes noise, it means that it is slipping because it’s worn out. Visit
an authorized Service Center in order to have the belt changed.
The electro-brush stops while you are vacuuming
• The thermal security feature has been activated: Turn off the vacuum cleaner by moving the
Stop/Start button to the Stop position (2.a) and unplug it. Check to see if any solid object is blocking
the rotation of the brush. If this is the case, remove the object and clean the electro-brush (fig.10),
then you may keep using the vacuum cleaner.
The electro-brush moves with difficulty
If you find that your vacuum cleaner slides with difficulty along surfaces, progressively reduce the
speed until you reach the « Min » position (2.b). If the problem persists, take your appliance to the
authorized Rowenta Service Center nearest to your home.
See the list of authorized Rowenta Service Centers or contact the Rowenta Consummer Service
department.
4 • Storage
After use, turn off your vacuum cleaner by moving the Stop/Start button to the Stop position (2a). Now
you may store your appliance vertically wherever you like, thanks to the parking position.
To place the vacuum cleaner in the parking position: Place the neck vertically in order to block the
appliance.
To continue using the vacuum cleaner: Take it by the handle and make it swing backwards in order to
unblock it and leave the parking position.
CLEANING AND MAINTENANCE
IMPORTANT: Always turn off the appliance and unplug it before storing or cleaning.
1 • Cleaning the dust tray (9)
1.a Fast emptying
Whenever the dust tray is full, empty it as follows: remove the tray by sliding it downwards (fig.14),
place it over a bin and press the “Push” button in order to open the trap and empty the tray’s contents
(fig.15). Close the trap (fig.16) and replace the dust tray on the main body of your appliance (fig.19).
RO_Aspirateur_AIR_FORCE_UPGRADE_903121-02_Mise en page 1 20/12/12 10:17 Page15
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rowenta RH8462 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rowenta RH8462 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 5,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info