762912
15
Zoom out
Zoom in
Previous page
1/180
Next page
14
EN
Before you use your vacuum cleaner for the first time, you must charge the battery completely
(for about 12 hours)
While the battery is being charged, the Stop/Start button must be in the Stop position (2.a)
• Place the vacuum cleaner near an electric power point.
• Plug the charger in and connect it to the vacuum cleaner using the socket located at the back of
the neck (fig.5).
• The charge signal (4) located at the front of the main body will light. Leave the vacuum cleaner
to charge. Once the charge cycle is completed (after about 12 hours), the light charge signal will
turn off automatically.
The vacuum cleaner can stay connected to the charger permanently, without any hazard. Keep in
mind, however, that if you decide to keep the charger connected it might become slightly hot. This
would be a completely normal phenomenon.
It is advisable to charge the vacuum cleaner immediately after each use in order to always have it
available with a fully charged battery. Thus, you will gain the maximum benefit from its cleaning
and autonomous performance functions. However, in case you plan to be absent for a long period
of time (on vacation, for example), it is advisable to unplug the charger for, in this case, the
autonomous performance function could be diminished due to automatic power loss.
3 • Turning on the appliance
Unplug the charger cord from the vacuum cleaner. If the charger remains connected to both the
power point and to the appliance, the latter will not function. Hold the vacuum cleaner by the
handle and slide the Stop/Start button downwards, towards one of the two following speeds (fig.6):
• « Min » : Used to vacuum clean thick or delicate rugs and carpets (2.b), as well as fragile surfaces.
Please note : always make sure that the wheels located at the back of the base are clean.
• « Max » : Used for optimum vacuum performance on all floor types, and in case of strong dirt
marks (2.c).
Vacuum cleaner running times* for each usage speed (with a fully charged battery):
USING THE ELECTRO-BRUSH
The electro-brush is a rotating, motorized brush that guarantees maximum cleaning effectiveness
by allowing the appliance to suck up dirt and clean in depth. The bristles, located all along the
brush, remove threads, hair and fur that might be caught on the surface of rugs and carpets.
Please note: If the vacuum head adheres too closely to the surface you are cleaning, change the
speed to « Min ».
ATTENTION: Do not vacuum large fragments of broken objects, as they could block and damage
the brush. Do not use the electro-brush on long hair carpets, on animal fur, or on fringes.
REMOVING AND CLEANING THE ELECTRO-BRUSH
ATTENTION: Always turn off the appliance and unplug it before storing or cleaning.
* May vary according to model
Speed 1
« Min »
Speed 2
« Max »
12 Volts Up to 25 minutes Up to 15 minutes
RO_Aspirateur_AIR_FORCE_UPGRADE_903121-02_Mise en page 1 20/12/12 10:17 Page14
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rowenta RH8462 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rowenta RH8462 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 5,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info