18
STORAGE
When you are not using the appliance, store it in a dry place.
IN THE EVENT OF PROBLEMS
• Never dismantle your appliance yourself. A poorly repaired appliance can cause risks for the user.
• Check the troubleshooting table below before contacting an approved Service Centre:
LET’S HELP PROTECT THE ENVIRONMENT!
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a local civic waste collection point or take to an approved service centre.
Problem Check
Solution
The appliance
does not emit
air.
• Is the power cord connected?
Connect the power cord to a plug with the
correct voltage.
• Are all the display elements off?
Press the start button and select the requi-
red function.
• Is there an electricity outage?
You can use your purifier once the power
comes on again.
• Is the front hood closed? Close the front hood properly.
The air flow does
not change.
• Is the appliance in Manual mode?
Select the correct operating mode.
The flow is a lot
weaker than be-
fore.
• Does the filter need cleaning or re-
placed?
Check the filter cleaning and replacement
frequencies and clean/replace the filter(s) if
necessary.
There is an un-
pleasant smell
coming from the
air outlet.
• Does the filter need cleaning or re-
placing?
Check the filter cleaning and replacement
frequencies and clean/replace the filter(s) if
necessary.
The air quality
light does not
change colour.
• Is the sensor glass covered in
dust?
Clean the sensor glass.
• Does the light still indicate poor air
quality?
Set the sensor sensitivity to “low sensiti-
vity” or medium.
• Does the light still indicate good
air quality?
Set the sensor sensitivity to “sensitive” or
“medium”.
EN
