763339
21
Zoom out
Zoom in
Previous page
1/146
Next page
19
2 • Using the Roll & Press system
To use the Roll & Press system:
• Hold the Roll & Press system handle and roll down the panel (fig. 15).
• Insert the handle into the locking hook on the pole and check that it is firmly locked (fig. 16)
• Hang the garments from the built-in hanger or from another hanger which may be suspended
from the hook located on the hanger rod (fig. 18-19).
To steam trousers, we recommend that you also use the support with clips as indicated in
the illustration (fig. 20).
• Grasp the steam head with the steam vents pointing away from you.
Start steaming by brushing material lightly with the grain of the fabric in an up/down vertical motion.
The vertical support panel helps keep the garment in place while steaming.
• Start at the top the garment and gradually move downward. Always steam in a vertical
position.
Always be careful not to touch the hot steam.
Always hang the steam head in an upright position on the hook when not in use.
• During use, the hose may make a gurgling noise. This is a normal occurrence due to
condensation. If the appliance begins to gurgle, rest the steam head on its support for a
few moments in order to direct any build-up of condensation into the appliance once again.
• During use, some water drips may appear on the telescopic pole. This is also a normal
occurrence due to condensation. To limit condensation, do not press the steam head too
heavily on the Roll and Press panel.
Tips for better results with your
garment steamer and Roll & Press system
We recommend checking the garment care label for manufacturer
recommendations before steaming. We also recommend testing the garment
and effect on the garment on an unobtrusive area such as an inner seam.
• Button up shirt collars to prevent them from slipping on the hanger during
steaming (fig. 17).
When steaming a shirt, begin with steaming the sleeves. Get hold of one sleeve
and cross it over the garment using the Roll & Press for vertical support (fig. 17).
To steam the back of the shirt, lift up the shirt by the shoulders and turn it around
the hanger (fig. 19).
To put crisp edges on trousers and shirts, press the steam head (without any
accessory) against the fabric and the vertical support.
• Gently press the steamer brush into fabric while making slow passes.
Avoid contact between the steam head and silk or velvet.
• Certain garments are smoothed more easily on the reverse side.
• Heavy fabrics may need to be steamed for longer.
• If you are using the steam head at a position close to the ground, raise the hose
frequently in order to avoid the formation of condensation. A gurgling noise
may be heard if the flexible pipe is pinched.
• If no steam is produced, if a gurgling sound is heard or if water is dripping
through the holes of the steam head, raise the steam hose occasionally to
remove condensation inside.
• Be careful at all times.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rowenta IS6350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rowenta IS6350 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 8,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info