739325
9
Zoom out
Zoom in
Previous page
1/78
Next page
4
EN
Select the fabric to be ironed on the thermostat dial. For perfect results, an optimum
position for each fabric has been pre-defined. This position is marked on the dial and
also represented with a louder “click” sound. You can also set your iron based on
the international temperature measurements •, ••, •••. Ensure your thermostat dial is
positioned on these settings.
When your iron reaches the required temperature, the thermostat indicator turns off
fig.7. You can start ironing.
IMPORTANT The iron takes longer to cool down than to heat up. We recommend that you start
with fabrics to be ironed at a low temperature. For mixed fabrics set the temperature for the
most delicate fabric.
TIP Always spray starch onto the reverse side of the fabric to be ironed.
3 • Dry ironing
Set the temperature to suit the type of material without pushing the autosteam
trigger and shot of steam button.
4 • Steam ironing (Autosteam & Steamforce)
Your iron is equipped with the Autosteam function*. The steam quantity and the
temperature will adjust automatically to the selected fabric. To get continuous
steam squeeze the autosteam trigger fig.8.
Your iron is equipped with a pump called Steamforce Technology which pushes
30 % more steam into the heart of the fibres. The pump may cause a slight noise. This
is not a technical fault! A few seconds are necessary to produce or to stop the steam.
5 • Shot of steam
Press the shot of steam button to generate a powerful jet of steam fig.9.
IMPORTANT Leave an interval of a few seconds between each shot and wait until the flow of
steam has finished before standing the iron on its heel.
6 Vertical shot of steam (from temperature setting () upwards)
Hold the iron vertically and press the shot of steam button to remove creases from
suits, jackets, skirts, hanging curtains etc. fig.10.
IMPORTANT Never direct the steam at persons or animals!
TIP Hold the iron 10 to 20 centimetres away from the garment to avoid burning delicate
fabrics.
7 • Spray
Press the spray button to dampen difficult creases fig.11.
8 • Anti-Drip system
It prevents water escaping from the soleplate when the temperature is too low.
9 • Auto Off function*
For your safety, the electronic system cuts off the power and the auto off indicator
light flashes fig.12a-12b when:
- The iron remains motionless for more than 8 minutes on its heel.
FABRIC
THERMOSTAT LED
INDICATION IRONING
LABEL
Nylon (Synthetic
fibres, e.g. viscose,
polyester) NYLON
silk SILK
wool WOOL
cotton COTTON
linen LINEN
LINEN
COTTON
WOOL
SILK
NYLON
AUTO OFF
(*) Depending on model
1103910063 DW9000 D1_110x220mm 16/04/13 16:54 Page4
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rowenta DW9040 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rowenta DW9040 in the language / languages: Danish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 6,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info