613471

Rowenta DM5909 Precision Manual

6
Zoom out
Zoom in
Previous page
1/32
Next page
6
steam and, at high temperatures, can form deposits in the steam chamber, which
will mark the laundry when they are emitted through the steam vents. For this
reason descaling liquids should not be used.
SERVICE/SPARE PARTS
Rowenta (U. K.) Limited has a network of Service Agents throughout the country
(see enclosed Service Information leaflet). These Service Agents carry out in-
guarantee repairs (free of charge) and out-of-guarantee repairs (chargeable) on
behalf of Rowenta. Should service be required, or the appliance appear faulty,
consult your local Rowenta Service Agent in the first instance. If a product
develops a fault during the guarantee period, it is the responsibility of the
consumer to supply to the Service Agent proof of the date of purchase of the
appliance (e. g. completed guarantee card and/or receipt showing the date of
purchase).
In cases of difficulty contact the Rowenta Consumer Relations Department (see
enclosed Service Information leaflet).
GUARANTEE (U. K. only)
Details of the Rowenta guarantee are shown on the guarantee card enclosed with
the appliance. This guarantee does not affect your statutory rights.
Should service or further information be required please contact the Rowenta
Consumer Relations Department (see enclosed Service Information leaflet).
In line with a policy of continuous product improvement Rowenta
reserves the
right to change product specifications without prior notice
.
TROUBLE SHOOTING
Problem Possible cause Solution
Iron is DISTILLED WATER DO NOT use 100% pure distilled water,
leaking. use tap water. In very hard water areas
mix half tap water with half distilled to
reduce hardness; or use inexpensive
bottled spring water.
SOFTENED WATER Most softened water is alright, but if you
experience leaks or spitting, change to
untreated tap water or inexpensive
bottled spring water. DO NOT use
100% distilled water.
Auto-off activated? Move iron or gently shake.
(depending on model)
Overuse of burst of Allow more time between each burst.
steam.
Iron won't Is iron plugged in? Check plug is in socket.
heat. Thermostat set too Turn thermostat higher.
low?
Auto-off activated? Move iron or gently shake.
(depending on model)
Ready light This is normal. The light goes on and off showing the
goes on thermostat is switching the heat on and
and off. off to maintain the correct temperature.
Iron does Iron is not hot If the iron is not hot enough the anti-drip
not steam. enough. system will activate and stop the iron's
steam production. Set thermostat to
higher position. Always allow iron suf-
ficient time to heat up (indicator light
goes out) before activating the variable
steam control.
Is variable steam If iron is fitted with a variable steam
control correctly set? control, turn it to a higher setting.
Steam valve is Move variable steam control from min to
clogged. max several times to clear blockage.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rowenta DM5909 Precision at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rowenta DM5909 Precision in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info