656097
32
Zoom out
Zoom in
Previous page
1/50
Next page
31
ROTWILD USER MANUAL
GETTING READY
ROTWILD bikes come almost completely
assembled ready-to-ride bikes or as a
frameset. ROTWILD mountain bikes may
only be used in o-road situations and
not in general public trac. Please obser-
ve your local trac regulations.
Before your rst ride with so called
„click pedals“ you have to familiarise
yourself with the clip-in and clip-out ac-
tion. Always read the instruction manual
rst.
Pedals
To mount your pedals, you will need an
appropriate open-end wrench or allen
key.
Before you screw the pedals into the
crank arm, apply a little assembly
grease to the threads and make sure
that you insert the washers between the
pedal and the crank if supplied.
When screwing the pedals into the
crank, please note that the right pedal
side has a right-handed thread (tighten
in a clockwise direction) while the left
side has a left-handed thread (tighten
in an anti-clockwise direction).
Handlebars and stem positioning.
With the help of the stem-handlebars de-
vice it is possible to adjust the ROTWILD
bike to the desired seating position. In
addition to the height of the handlebars
it is possible to position the handlebars
inclination.
Home position
Slightly release the screws to be found
on the stem with the help of a tting
allen key/torx wrench, so the handlebar
can turn.
Swing the handlebars forwards out of
the transport position into the home
position. The centring mark to be found
on the handlebars should be positioned
exactly between the two stem clamps.
Slightly pull the stem clamps in order
to secure the handlebars position.
Now open the rear two stem clamp
screws with the help of a tting allen
key/torx wrench in order to position
the handlebars stem device. Align the
handlebars at a right angle to the front
wheel.
Gradually tighten both the stem clamp
screws alternately – clamping torque
8 Nm.
Control: Put the front wheel between
your legs. The xation is correct when
you can no longer twist the handlebar.
Now align the handlebars (incline).
The Road Bike handlebars should be
positioned in a way that the lower handle
bar is parallel to the road in the home
position.
It is recommended to tighten the stem
clamp screws one after the other or
GETTING READY
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rotwild Road 2015 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rotwild Road 2015 in the language / languages: English, German as an attachment in your email.

The manual is 3,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info