Manual Rotel RSX-1056 (page 39 of 46) (English)

498117

Zoom out

Zoom in

1/46

English

LARGE and SMALL configurations is that

the bass response may not be as consis-

tent from channel to channel as it might

be with the all SMALL configuration.

NOTE

: As an alternative configuration with a

satellite/subwoofer package as the front

speakers, follow the speaker manufacturer’s

instructions, connecting the high-level inputs

of the powered subwoofer directly to the front

speaker outputs of the RSX-1056 and con-

necting the satellites to the subwoofer’s own

crossover. In this arrangement, the speakers

would be classified as LARGE and the sub-

woofer setting would be OFF for all surround

modes. No information is lost during play-

back because the system redirects bass infor-

mation to the front LARGE speakers. While

this configuration ensures proper satellite

speaker operation by using the speaker’s own

crossovers, it has some disadvantages in terms

of system calibration and would generally not

be the preferred configuration.

Speaker Setup

SPEAKER SETUP

FRONT:Large

CENTER:Large

SURROUND:Large

CENTER BACK:Large1

SUBWOOFER:Yes

ADVANCED:Enter

MAIN MENU

The SPEAKER SETUP menu is used to config-

ure the RSX-1056 for use with your specific

loudspeakers and to determine the bass man-

agement configuration as described in the

previous overview. The menu is accessed from

the MAIN menu.

The following speaker options are available:

FRONT SPEAKERS (small/large): Use the

LARGE setting to have the front speakers play

low bass (full-range). Use the SMALL setting

to redirect normal bass away from these speak-

ers to a subwoofer (high-pass filtered).

CENTER SPEAKER(S) (large/small/

none): Use the LARGE position (not available

with SMALL front speakers) to have the cen-

ter speaker play low bass (full-range). Use the

SMALL position if your center channel speaker

has limited low frequency capability, or if you

prefer that the bass be sent to the subwoofer

(high-pass). Select the NONE setting if your

system does not have a center channel speaker

(the surround modes will automatically divide

all center channel information equally between

the two front speakers, creating a phantom

center channel).

SURROUND SPEAKERS (large/small/

none): Select the LARGE setting (not avail-

able with SMALL front speakers) to have the

surround speakers play low bass (full-range).

If your rear speakers have limited bass capa-

bility or if you would prefer that the bass go

to a subwoofer, use the SMALL setting (high-

pass). If your system has no rear surround speak-

ers, select the NONE setting (surround chan-

nels are added to the front speakers so none

of the recording is lost).

CENTER BACK SPEAKER(S) (large1/

large2/small1/small2/none): Some

systems have one or two additional center back

surround speakers. Select the LARGE settings

(not available with SMALL front speakers) to

have your center back speaker(s) play low bass.

Use LARGE 1 if you have one center back

speaker (6.1) or LARGE 2 (7.1) if you have

two center back speakers (7.1). If your cen-

ter back speakers have limited bass capabil-

ity or if you would prefer that the bass go to

a subwoofer, use the SMALL setting (SMALL1

for one speaker, SMALL2 for two speakers).

If your system has no center back speakers,

select the NONE setting. With center back

speakers, the Rotel XS eXtra surround, Dolby

Digital EX, DTS-ES, Dolby Pro Logic II, DTS

Neo:6 or other decoders will provide center

back signals for any surround mode.

SUBWOOFER (yes/no/max): The YES set-

ting is the standard setting if your system has

a subwoofer. If your system does not have a

subwoofer, select NO. Select the MAX setting

for maximum bass output with normal bass

being duplicated by both the subwoofer and

any LARGE speakers in the system.

ADVANCED: Speaker configuration is gener-

ally a global setting for all surround modes

and need only be done once. However, for

special circumstances, the RSX-1056 provides

the option of setting the speaker configuration

independently for each of four surround modes.

Select the ADVANCED line on the menu and

press ENTER to go to the ADVANCED SPEAKER

SETUP menu described in the following sec-

tion.

To change a setting on the SPEAKER SETUP

menu, place the highlight on the desired line

using the UP/DOWN buttons and use the +/

– buttons to toggle through the available set-

tings. To return to the MAIN menu, press the

ENTER button. Press the MENU/OSD button

on the remote to cancel the display and re-

turn to normal operation.

Advance Speaker Setup

ADV SPEAKER SETUP

SPEAKER:Front

CROSSOVER:100Hz

DOLBY:Small

DTS:Small

STEREO/MPEG:Large

MUSIC:Small

SPEAKER SETUP MENU

In most cases, the standard speaker configu-

ration described above is a global setting and

can be used for all surround modes. However,

the RSX-1056 provides the capability to cus-

tomize these settings for four different surround

modes: Dolby, DTS, Stereo, and Music. For

example, you could set up the Dolby and DTS

modes for 5.1 channel sound, while the Ste-

reo mode changes to a 2-speaker setup with

or without a subwoofer. In addition, the AD-

VANCED SPEAKER SETUP allows you to se-

lect a customized high-pass crossover frequency

for the front, center, surround, and surround

back speakers.

NOTE

: In most systems, the default settings on

this menu will provide the most predictable

results and most users will not need to change

any settings. You should fully understand bass

management and have a specific reason for

needing a custom configuration before chang-

ing these settings. Otherwise, skip to the fol-

lowing topic, SUBWOOFER SETUP.

The available settings on the ADVANCED

SPEAKER SETUP menu are as follows:

SPEAKER (front/center/surround/cen-

ter back/subwoofer): Select the set of

speakers to be configured with custom settings.

CROSSOVER (40Hz/60Hz/80Hz/

100Hz/120Hz/150Hz/200Hz): Typi-

cally, the RSX-1056 uses a single master set-

ting for the high-pass and low-pass crossover

point between all SMALL speakers and the

subwoofer. This master crossover point is set

on the SUBWOOFER SETUP menu described

in the following section. When you first ac-

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Rotel RSX-1056 in the language / languages: English as an attachment in your email.

The manual is 2,04 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Rotel RSX-1056 Manual

Product: