532620
40
Zoom out
Zoom in
Previous page
1/120
Next page
GB-40
Operation
DISPLAY INFORMATION
The LCD switches to the SLEEP mode automatically after 4
minutes of inactivity. In this mode, the fi tness computer
displays the temperature, the time and the date. Pressing
any button will interrupt the SLEEP mode.
1. TIME
The computer displays the current workout time. If a spe-
cifi ed time is entered, the time will run backwards
(countdown) and you will hear an acoustic signal when
this time has elapsed (0:00). (Specifi ed time max. 199
minutes)
2. SPEED
The computer indicates the current speed. (0.099.9
km/h). Some models will alternately display the pedal
revolutions/min. (“RPM”)
3. DISTANCE
The computer shows you the distance you have travelled.
If a specifi ed distance is entered, the display will run
backwards (countdown) and you will hear an acoustic
sig nal when this time has elapsed (0.00). (Specifi ed dis-
tance max. 0.199.9 km)
4. CALORIES
Here the computer shows you the calories you have bur-
ned during the workout. When entering a specifi ed calo rie
count you can choose from 10 to max. 990 kcal in incre-
ments of 10. In this case, the display runs backwards
(countdown) to zero. This ends your workout and an
acoustic signal sounds.
5. PULSE
The PULSE display refl ects your current pulse rate in
heartbeats per minutes. The display can only refl ect the
correct values if you properly grasp both sensors on the
handles with your palms. Under the circumstances, it can
take up to 2 minutes until the pulse rate is displayed.
6. WATT
The computer shows the wattage (10350).
7. INTENSITY LEVELS
Each programme has 16 intensity levels. The LCD display
shows 20 columns (horizontal) and no more than 16 bars
(vertical). One bar corresponds to one intensity level. The
ashing column refl ects the progress of time or the route,
depending on the respective specifi cation.
With the UP/DOWN buttons you can increase or decrease
the intensity levels even during the ongoing workout
(WDST display). This is not possible for programmes
which automatically set the intensity levels (such as
WATT or the PULSE programme).
WORKOUT PARAMETERS
Workout parameters are objectives you can set for every
workout programme. The following workout parameters are
available:
You can generally select or even combine several exercise
parameters. Some parameters cannot be set in particular
programmes.
The workout parameters can only be specifi ed after you have
selected a workout programme. You will fi nd a more detailed
description in the setting description of the respective pro-
grammes.
Parameter Setting range Standard value Step Note
Time 1:00~99:00 00:00 +/- 1
Distance 0,1~99,9 0,0 +/- 0,1
Calories 10~990 0 +/- 10
Pulse 30~240 0 +/- 1
Watt 10~350 120 +/- 5 This value can only be specifi ed in the
watt programme.
REX_Trainer_CX400E_12.indd GB-40REX_Trainer_CX400E_12.indd GB-40 20.06.12 10:2620.06.12 10:26
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rossler REX Trainer CX400E 88743 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rossler REX Trainer CX400E 88743 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 9,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info