Manual Rommelsbacher VAC485 (page 28 of 32) (English, German)

714316

Zoom out

Zoom in

1/32

• Prior to cleaning the appliance or equipment, please wash your hands thoroughly.

• Clean the appliance and the vacuum chamber with a moist cloth and a mild dishwashing detergent

(no abrasives or solvents) before and after each use. Should any liquid get into the appliance, under no

circumstances connect the appliance to the mains, but contact your service point.

• The foam sealings as well as the rubber lip can be removed for cleaning. Clean the sealings and the rubber

lip with a damp sponge and mild dishwashing detergent.

• Allow the sealings and the rubber lip to dry completely before attaching them again.

• When assembling, make sure the sealings and the rubber lip ﬁt correctly. Improper installation will affect

the function of the appliance.

• Do not use any abrasives or solvents.

• Never use a steam jet appliance for cleaning.

WARNING: Risk of injury!

• Always unplug the appliance before cleaning.

• Never immerse base unit, power cord and mains plug into

water or clean them under running water.

• Before cleaning the appliance, it must have completely cooled

down!

Cleaning and care

Maintenance

• Worn, deformed or damaged sealings must be replaced in order to guarantee proper working of the

appliance.

• Spare sealings can directly be purchased at your service department.

• Sealings are wearing parts; therefore they are not covered by the appliance’s warranty.

2.) Vacuuming the container

• To start the programme, press the button “Behälter“.

Note: The process can be stopped any time by

pressing the button “Automatik / Stopp“ once again.

Note: To avoid overheating, the appliance stops

automatically after one minute extraction time, if the

container or the hose are not tight.

• The appliance activates the pump and extracts the air from the container. A vacuum develops. The

pilot lamp below the button “Behälter“ lights up.

• The pump stops after successful extraction of air.

• As soon as the pilot lamp below the button “Versiegeln“ goes out, the process is completed.

• The appliance switches to operation mode now. The ﬁrst pilot lamp of the status display as well

as the upper resp. lower pilot lamps - according to the setting - of the buttons “Lebensmittel” and

“Pumpleistung” light up.

• Disconnect the vacuuming hose from the container and the appliance.

• Pull the mains plug after each use and bring the upper part of the appliance into parking position.

Note: You can see the progress of the function in the status display.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher VAC485 in the language / languages: English, German as an attachment in your email.

The manual is 9,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Rommelsbacher VAC485 Manual

Product: