714316
27
Zoom out
Zoom in
Previous page
1/32
Next page
27
• The appliance activates the pump and extracts air from the vacuum chamber thus developing a
vacuum. The pilot lamp below the button “Automatik / Stopp“ lights up.
• After successful extraction of air, the pump stops and the sealing of the foil starts. Now the pilot
lamp below the button “Versiegeln” lights up additionally.
• As soon as this pilot lamp goes out, the process is completed.
• The appliance switches to operation mode. The first pilot lamp of the status display as well as the
upper resp. lower pilot lamp of the buttons “Lebensmittel“ and “Pumpleistung” – according to the
setting - light up.
• In order to remove the foil, fold the handle upwards and then open the upper part up to the stop.
• Check the sealing seam. A correct seam should be a smooth straight line without wrinkles and
showing no structure anymore.
• Pull the mains plug after each use and bring the upper part of the appliance into parking position.
Note: You can see the progress of the function in the status display.
D.) Vacuuming of food in containers
ATTENTION: Only use special vacuuming containers.
Please also pay attention to the safety notes which are enclosed
with the containers!
1.) Preparing the appliance for operation
• Completely unwind the power cord from the cord storage.
• Insert the plug into a socket. All pilot lamps light up for a short time.
• The appliance is in standby mode. The pilot lamps above or below the buttons “Lebensmittel“ and
“Pumpleistung” light up.
• Close the upper part of the appliance.
• For locking the upper part, fold the handle down (position “down“). As soon as the handle is in
the correct position, the first pilot lamp of the status display lights up. The appliance is ready for
operation now.
Firmly insert one adapter port of the vacuuming hose
to the opening for container vacuuming until the
stop.
Firmly insert the other adapter port to the opening of
the container lid.
Pay attention to the proper fit of the vacuuming hose
at both ports!
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher VAC485 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher VAC485 in the language / languages: English, German as an attachment in your email.

The manual is 9,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info