714262

Rommelsbacher MD1000 Manual

43
Zoom out
Zoom in
Previous page
1/60
Next page
43
Pressure valve for locking the lid
Lid locking not activated:
• The valve pin in the lid recess is not visible. The pressure inside of the pot is
not sufficient enough to activate the lid locking.
• The lid can be opened.
Lid locking activated:
• The valve pin in the lid recess is visible. The pressure inside of the pot has
increased so much that the lid locking is activated.
• The lid is safely closed.
Preparing the appliance for use
1.) Check and insert gasket ring
• Check the gasket ring for damage prior to every use. A damaged gasket ring prevents the generation of
steam pressure. If the gasket ring is damaged, t must not be used any longer and has to be replaced.
NOTE: A new gasket ring can be purchased at our customer service.
2.) Check valve and pin for lid locking ( 9 + 11 )
• Check the ease of movement by moving the valve up and down. Pay attention that the valve can be
moved without effort and that the transparent valve cap shows no damages and is placed correctly
on the valve pin. If the valve cap is damaged, it may not be used anymore and must be replaced.
NOTE: A new valve cap can be purchased at our customer service
3.) Check safety bolt for lid locking ( 10 )
• Check the ease of movement by moving the safety bolt back and forth. Make sure that the safety
bolt can be moved without any effort.
4.) Check steam outlet valve ( 7 + 8 )
• Remove the black valve cap from the top of the lid and check the valve pin for blockages. Then replace
the valve cap in the correct position (indicated by the recess).
• Check if the button for release of the steam pressure can be pushed without effort. Thereby the
black valve cap must move upwards resp. downwards.
5.) Place the pot on the heating plate in the pressure container. Pay attention that the heating plate is free
from residues.
6.) Insert the power cord (connector) into the port on the back of the appliance. Pay attention to a firm
and correct fitting of the power cord. If the power cord is too loose, this may result in damages at the
cable and the plug.
7.) Insert the other side of the power cord to a socket. A signal tone sounds, both points in the middle of
the time/temperature display are flashing. The appliance is ready for use.
… 43 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher MD1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher MD1000 in the language / languages: English, German as an attachment in your email.

The manual is 3,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info