712149
18
Zoom out
Zoom in
Previous page
1/24
Next page
18
Operating the appliance
Attention: Hazard of injury!
During operation, do not put any object in the appliance or
reach with your hands in the filling hole!
To avoid injuries it is imperative to keep away your hair,
hands and clothes from the running stirrer!
Do not touch the frozen freezer bowl with wet hands!
Important notes:
! We recommend to allow the motor unit to cool down for at least 15 minutes between two preparation
processes.
! The appliance is equipped with several safety functions so that the motor will not suffer any damage in
case of overheating resp. blockade of the stirrer.
°
Overheating: The appliance switches off in case of motor overheating. After cooling down, the
appliance starts operation again automatically. Please note that the timer continues running during
the cooling phase.
°
Blocking: If the ice cream gets too hard during preparation, the motor blocks. This is recognizable
by frequent right left movements of the stirrer. In that case stop the process by pressing the button
“start/pause”.
1.) Preparing the appliance for operation
Place the empty and dry freezer bowl for at least 12 hours in a 4-star freezer compartment at
- 18 °C. Please pay increased attention that the freezer bowl is placed upright and horizontally to
allow the coolant inside to distribute evenly.
Tip: We recommend to store the freezer bowl permanently in the freezer so that you always can start
ice cream making without a long waiting time beforehand. Use the provided lid to protect the bowl
against soiling.
Prepare the raw ice cream mixture in a separate, clean bowl and pre-chill it in the refrigerator for at
least 2 to 3 hours. The temperature of the mixture should not exceed 2 - 4 °C. Observe the maximum
filling quantity of 500 ml.
NOTE: Do not pour hot liquids into the freezer bowl. Too large differences in temperature between
freezer bowl and contents may cause damage to the freezer bowl.
Always unplug the appliance before assembly.
Insert the motor unit into the upper part of the casing and press it down until it clicks into place.
Insert the stirrer into the opening of the motor block until it stops.
Don´t take the frozen freezer bowl out of the freezer and insert it into the base of the casing until
immediately before using the appliance.
Place the assembled upper part of casing onto the base of the casing and let both lateral locking
clamps click into place. Pay increased attention to both white arrows at the base and at the upper
part of casing.
2.) Start the appliance and pour in the prepared mixture
Connect the appliance to the mains.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher IM 12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher IM 12 in the language / languages: English, German as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info