490068

Rommelsbacher ELTAC EKA 179 Manual

8
Zoom out
Zoom in
Previous page
1/16
Next page
8
Always fi ll with water before switching on the appliance.•
Do not overfi ll container, leave at least 4 cm space below the container rim. If overfi lled, hot •
liquid may spurt out.
Risk of scalding from escaping steam.•
Caution: • The appliance will become hot when in use, so please only grab it on its insulated
handles. Only carry it when it is cool.
Temperature control/Setting the thermostat
The appliance is equipped with a precision thermostat (capillary tube thermostat). The thermos-
tat is infi nitely variable from approx. 30° C up to the boiling point. An additional thermometer is
not required.
For juice making the appliance is equipped with a special operation mode, which ensures conti-
nuous heating.
When the cooking process has been completed or needs to be interrupted, reset the tempera-
ture selector to off-position and disconnect the plug.
Notes for cooking
The boiling point of the water varies in accordance with the atmospheric pressure and the alti-
tude of the location.
If the thermostat is set too high, this results in continuous heating and consequently strong
development of steam, loss of water in the appliance and furthermore a waste of energy.
To fi nd the correct setting for boiling on your appliance, simply take the following steps:
1. Turn the temperature selector clockwise to the right to cooking setting („Kochen“).
2. Wait for the water to boil.
3. Slowly turn the temperature selector slightly to the left until the pilot lamp extinguishes.
After a short time the regulator will trigger the heating again.
Juice making
The Auto-Preserving Cooker is excellently qualifi ed for juice making, too, when using the Juice-
Extraction Top, which you may buy in the specialised trade under model numbers EA 1803.
Operational procedure in short
1) Preserving
a) Place grating insert
b) Put in prepared glass jars or bottles
c) Fill with water
d) Place lid
e) Connect plug to electrical outlet
f) Select temperature
g) Pilot lamp is on (heating process)
h) Pilot lamp goes out for the fi rst time indicating that the selected temperature has been
reached; now the actual cooking time begins. The temperature is maintained automatically.
i) Once the cooking procedure is fi nished, reset the temperature selector to off-position and
pull the mains plug.
2) Juice making (Juice Extraction Top is available in the specialised trade)
a) Fill with at least 6 litres of water
b) Place adapter ring and Juice Extraction Top on the appliance according to the instructions
c) Place fruit prepared for juice extraction in the fruit basket
d) Place lid
e) Connect plug to the electrical outlet
f) Set temperature selector to ‘Entsaften’ (juice-making mode)
g) Pilot lamp is on (heating process)
h) Attention: Add water prior to every further juice-making procedure.
i)
Once operation is ended reset the temperature selector to off-position and pull the mains plug.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher ELTAC EKA 179 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher ELTAC EKA 179 in the language / languages: English, German, French as an attachment in your email.

The manual is 0,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info