712147
31
Zoom out
Zoom in
Previous page
1/48
Next page
31
Inserting the water filter
Make sure the appliance had been bled correctly before inserting the water filter
(please refer to “Bleeding the system”)!
As this is an activated carbon filter, the water may take on colour when starting to rinse the filter. This is normal and
will be cleared by rinsing the filter.
For perfect function, the filter granulate must be completely soaked. Thus, follow all below steps consecutively.
The date of exchange can be set on the upper side of the filter (1 – 12).
Exchange the water filter after 30 litres or after 2 months at the latest.
Replacement filters are available in specialised trade or from our customer service.
Step 1:
Unpack the filter cartridge.
Step 2:
Prepare filter cartridge.
Steep the filter cartridge for 15
minutes at least in cold tap water.
Step 3:
Remove the water tank
(previously remove the portafilter if
necessary).
Empty residual water.
Step 4:
Position the filter cartridge firmly in
the intended holder at the bottom of
the water tank.
Step 8:
Place a vessel below the outlet of
the hot water/steam nozzle.
Step 5:
Fill the water tank with fresh tap
water up to the “MAX” marking.
Step 6:
Insert the water tank.
Make sure the water tank is inserted
as far as it will go on the gasket.
Step 7:
Position the portafilter without filter
insert at the marking of the brew
head and lock it by turning it to the
right as far as it will go.
Step 9:
Choose the function
“espresso/hot water”.
Step 10:
Switch the appliance on.
The appliance heats up and the
temperature pilot lamp glows red
permanently.
When the lamp exinguishes, the
appliance is ready for use. The
operation pilot lamp glows blue
permanently.
Step 11:
Start hot water supply.
Turn the rotary knob to the right.
Dispense hot water for 1 minute. Use
the water for warming the cups.
Warning: Casing, brew head,
portafilter, filter inserts and hot
water/steam nozzle are getting hot
during use!
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher EKS1510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher EKS1510 in the language / languages: English, German as an attachment in your email.

The manual is 2,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info