714277

Rommelsbacher EGS80 Manual

23
Zoom out
Zoom in
Previous page
1/24
Next page
23
• Note: All detachable accessory parts may also be cleaned in the dishwasher at low temperature and in the
upper dish rack. However we recommend to clean them by hand as the cutting inserts may become dull in
the dishwasher in short time.
• Clean the appliance immediately after use so that residues do not dry on.
• Remove all detachable parts from the base unit.
• Clean the outside of the base unit with a damp tissue and wipe it dry.
• Clean all detachable accessory parts using hot water with some mild detergent. For cleaning of the cutting
inserts, use the enclosed cleaning brush.
• Prior to the next use, all accessory parts have to be completely dry.
• Do not use any abrasives or solvents!
• Never use a steam jet appliance for cleaning!
• Attention: Hazard of injury!
• Always unplug the appliance before cleaning!
• Never immerse the base unit, power cord and the mains plug
in water or clean them under running water!
• Do not reach into the sharp cutting inserts with your hands!
• The fixing brackets of the pusher are pointed and may be
sharp-edged!
• Handle cutting tools with care to avoid injuries!
Cleaning and maintenance
Troubleshooting
Error Cause and corrective actions
Appliance without function o Check whether the mains plug is connected to the socket.
o If necessary check by means of another device if the socket
functions properly.
o Check whether the appliance is assembled properly and thus
both safety switches are activated.
Spirals are uneven
Spirals are unappealing
Food spinning in the pusher
o Check whether the food has been fixed properly and tightly
on the pusher.
o Too much pressure has been applied on the pusher, try again
with less pressure to the pusher.
o Too little pressure has been applied to the pusher, try again
with more pressure to the pusher.
o The food is too soft and therefore not suitable to be processed
in the spiral slicer.
o Possibly the blades of the cutting inserts are blunt, in this case
exchange the inserts.
Appliance stops during operation o The food is too hard and therefore not suitable to be
processed in the spiral slicer.
o Check whether the cutting insert is clogged. In this case clean
the insert and start the appliance again.
… 23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher EGS80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher EGS80 in the language / languages: English, German as an attachment in your email.

The manual is 3,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info