714008
9
Zoom out
Zoom in
Previous page
1/28
Next page
9
Topferkennung
Das Gerät ist pro Kochstelle mit einem Sensor ausgestattet, der erkennt, ob sich Kochgeschirr auf der
Kochstelle befindet.
Wird nach dem Einschalten kein geeignetes
Kochgeschirr auf der Kochstelle erkannt, so
erscheint im Display (4) die Anzeige „E0“ und ein
periodisches Warnsignal ertönt. Wird innerhalb von
45 Sekunden kein Topf erkannt, schaltet das Gerät
automatisch in den Modus „Standby“.
Wird während des Betriebes ein Topf von der
Kochstelle entfernt, erscheint im Display (4) die
Anzeige „E0“ und ein periodisches Warnsignal
ertönt. Sollte dann innerhalb von 45 Sekunden
wieder ein Topf aufgestellt werden, wird der
Kochvorgang mit der zuletzt eingestellten Stufe
fortgesetzt und eine eventuell vorher eingestellte
Laufzeit läuft weiter. Wird jedoch innerhalb von 45
Sekunden kein Topf erkannt, schaltet das Gerät
automatisch in den Modus „Standby“.
Lüfter
Nach dem Einschalten startet ein Lüfter, der die Bauteile im Inneren des Gerätes kühlt und so vor Überhitzung
schützt. Ein Nachlaufen des Lüfters im Modus „Standby“ nach langer Betriebsdauer ist normal.
Betriebsdauerbegrenzung
Die Betriebsdauerbegrenzung bewirkt eine automatische Abschaltung der Kochstelle in den Modus „Standby“,
wenn über einen Zeitraum von 2 Stunden keine Veränderung an den Einstellungen vorgenommen wurde.
Dies geschieht unabhängig von der jeweils eingestellten Stufe.
Nach einer automatischen Abschaltung kann das Gerät erneut eingeschaltet werden und die maximale
Betriebsdauer ist wieder aktiv.
Ist die Laufzeit-Einstellung (Timer) mit einer Zeit größer 2 Stunden aktiviert, so hat diese Einstellung
Vorrang. Das Gerät schaltet nach Ablauf der eingestellten Zeit ab.
Vorrangschaltung
Die Steuerung des Gerätes kann während des Betriebes jederzeit durch den jeweiligen Hauptschalter in
den Modus „Stand-by“ gebracht werden, auch wenn noch andere Sensoren betätigt sind.
Inbetriebnahme des Gerätes
Modus „Standby“
Stecken Sie den Stecker in die Steckdose.
Im Display (4) erscheint „OFF“ und ein akustisches
Signal ertönt.
Die Steuerung befindet sich im Modus „Standby“.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher CT3405IN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher CT3405IN in the language / languages: English, German as an attachment in your email.

The manual is 2,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info