713985

Rommelsbacher CG2308TC Manual

21
Zoom out
Zoom in
Previous page
1/24
Next page
21
3. Changing the grill temperature
• To change the grill temperature during operating mode, press the “+” or “-” touch key once in order to
change over to the setting mode. (For safety reasons, this first touch does not result in a change of the
grill temperature.)
• Now, by touching the “+” or “-” key once again, the grill temperature can be changed in steps of 10 °C.
• NOTE: If no further sensor is touched within 5 seconds, you will hear an acoustic signal and the
appliance switches back to operating mode.
4. Display of the current temperature
• NOTE: You may display the current temperature of the grill plate at any time in order to check the
heating up process and the temperature control. Temperatures of the grill surface, which are < 40 °C are
not detected and displayed as “40 °C”
• Press the “°C” touch key once to enter the display mode. The red LED “current temperature”lights up
and the actual temperature of the grill surface is displayed. The normal operating mode with
temperature regulation is still running in the background.
NOTE: If the appliance is in display mode, it is not possible to change the grill temperature.
• The display mode is automatically quit after 5 seconds, or by pressing the “°C” touch key again.
5. Switching off
• Touch the main switch. You will hear an acoustic signal and all displays go out. The control unit is in
waiting mode now and the “operation” LED above the main switch flashes.
• NOTE: With the main switch the control unit can be switched off any time during operation, even if
other key functions are active.
• As long as the grill plate has a temperature of > 60 °C after switching off, the warning “hot” will be is
displayed. If the appliance is disconnected from the power supply, the display goes out completely.
Safety functions
The appliance features several safety functions, which are intended to protect you as user as well as the
appliance from unintended or dangerous operating situations.
Operating time limitation
The operating time limitation causes an automatic switch off in case there was no touch key activation
over a period of one hour. It works independent of the set temperature. Once the grill has been switched
off automatically, it can be switched on again and the maximum operating time is re-activated.
Temperature monitoring
If the temperature sensor detects a low ambient temperature (< 10 °C), “lo” (=low) is displayed.
Normally, this indication goes out after several seconds in operating mode. If, however, the sensor does
not detect a change in temperature after a specified period, the sensor monitoring is activated.
Sensor monitoring
If an inadmissible value (temperature ≤10 °C and ≥320 °C) is measured, the error code “E06” is
displayed. In this case unplug the appliance and wait a short time, then you can again put the grill in
operation. In case the “E06” error code still remains on the display, you have to contact your technical
service point.
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher CG2308TC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher CG2308TC in the language / languages: English, German as an attachment in your email.

The manual is 2,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info