Chapter 2: Getting Started
9
The battery icon on the LCD screen indicates the battery level. See “LCD
Screen Layout” on page 11.
Turning the Power On and Off
There are two ways to turn on the camera:
• Press and hold the Power button for 0. 3 seconds. The start up image
displays briefly and the startup sound plays if enabled. The zoom lens extends
and the camera is turned on in Record mode.
• Press and hold the Playback button for 0.3 seconds. The camera is turned
on in Playback mode. The zoom lens are not extended.
To turn off the camera, press the Power button.
See “Modes” on page 10 to know more about Record and Playback mode.
Initial Settings
When you turn on your camera for the first time, you will be asked to do the initial
settings of your camera.
When you turn the Power button on, the Language Menu is displayed on the LCD
screen for you to setup the display language.
Setting the Language
1. Tap , to move through the selection.
2. Tap to select language.
Setting the Date & Time
1. Tap the screen to move through date and time.
2. Tap or to change the value of date and time.
3. Tap SET to apply.
Now, you are ready to start taking photos and videos.
If the batteries are removed for more than 48 hours, the Date & Time will have to be re-set.