EN-14
Initial Settings
Setting the Date and Time
The date/time needs to be set if and when:
The camera is turned on for the first time.
The camera is turned on after leaving the camera without the battery for an
extended period of time.
When the date and time information is not displayed on the LCD monitor, follow these
steps to set the correct date and time.
1. Slide the mode switch to [ ] or [ ], and press
the MENU button.
2. Select [Setup] with the f button.
3. Select [Date/Time] with the c / d buttons, and
press the SET button.
4. Select the date format with the c / d buttons,
and press the SET button.
Select the item’s field with the e / f buttons
and adjust the value for the date and time
with the c / d buttons.
The time is displayed in 24-hour format.
After confirming all settings are correct, press
the
SET
button.
5. To exit from the [Setup] menu, press the MENU
button.
Capture
20 : 00
03 / 01 / 2008
Date/Time
SET:Enter
SET:Adj.
SET:Enter
