EN-13
Charging the Battery
The AC power adapter may charge the battery or operate as the camera's power
supply. Make sure that the camera is turned off and the battery is inserted before
starting.
1. Insert one end of the AC power adapter
into the DC IN 5V terminal of the camera.
2. Insert the other end of the AC power
adapter into a wall outlet.
The status LED lights red when
charging has started and the LED turns
off when charging is completed. The
LED lights green when a charging error
has occurred or no battery is inserted
inside the camera.
It is recommended that you fully discharge the battery before recharging.
Charging time varies according to the ambient temperature and the status of
battery.
This camera must use with the specified battery and AC power adapter for battery charging.
Damage caused by using of an incorrect adapter is not covered under the warranty.
The battery may feel warm after it has been charged or immediately after being used. This is
normal and not a malfunction.
When using the camera in cold areas, keep the camera and battery warm by holding them inside
your outer clothes.