603202
31
Zoom out
Zoom in
Previous page
1/184
Next page
31
Playing Sounds
Quick Start
Selecting Performances
To switch Performances, after matching the send channel for the external MIDI
device with the XV-5050’s Performance Control channel (Control Channel p. 108),
send the Bank Select number and Program Change messages.
Upon execution of Factory Reset,
Performance Ctrl-Ch
is set to “16.” Here, set the
external MIDI device’s send channel to “16,” then try switching the Performance to
PB:029 Organ/Lead.
1.
Use a MIDI cable to connect the MIDI OUT connector on the external
MIDI device to the XV-5050’s MIDI IN connector.
2.
Press the [PERFORM] button, lighting the indicator.
The XV-5050 reverts to Performance mode.
3.
Set the external MIDI device’s send channel to “16.”
For instructions on making this setting, refer to the owner’s manual for the external
MIDI device.
4.
Send a Bank Select MSB (Control Number 0) with a value of “85” to
the XV-5050.
5.
Next, send a Bank Select LSB (Control Number 32) with a value of
“65.”
6.
Send a Program Change with a value of “29.”
The Performance name appearing in the page changes to PB:029 Organ/Lead.
fig. 42.e
* Each Performance has a corresponding Bank Select number and Program number, as shown
below.
Rhythm Sets
Bank Select number Program
number
Bank Number MSB LSB
US (User)
001–004 86 00 001–004
PA (Preset A) 001–002 86 64 001–002
PB (Preset B) 001–002 86 65 001–002
PC (Preset C) 001–002 86 66 001–002
PD (Preset D) 001–002 86 67 001–002
PE (Preset E) 001–002 86 68 001–002
PF (Preset F) 001–002 86 69 001–002
PG (Preset G) 001–002 86 70 001–002
PH (Preset H) 001–002 86 71 001–002
GM (GM2) 001–009 120 00 001–057
XA (Expansion A) 001– 92 0– 001–
XB (Expansion B) 001– 92 0– 001–
Performances
Bank Select number Program
number
Bank Number MSB LSB
US (User)
001–064 85 00 001–064
PA (Preset A) 001–032 85 64 001–032
PB (Preset B) 001–032 85 65 001–032
Numbers for XA and XB
will be different depending
on the Wave Expansion
Board you’ve installed. For
more information, refer to
the manual for the SRX.
XV-5050_e.book 31 ページ 2003年6月27日 金曜日 午後3時14分
31


Need help? Post your question in this forum.

Forumrules
1

Forum

roland-xv5050

Reset search

  • my xv5050 power is of how can i repair the powerboard Submitted on 14-7-2024 at 03:57

    Reply Report abuse
  • my xv5050 power is of how can i erpaie the powerboad Submitted on 14-7-2024 at 03:53

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland XV5050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland XV5050 in the language / languages: English as an attachment in your email.

The manual is 6,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland XV5050

Roland XV5050 User Manual - Dutch - 183 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info