603202
30
Zoom out
Zoom in
Previous page
1/184
Next page
30
Playing Sounds
Using an External MIDI Device to Select
Patches and Change Other Settings
Selecting Patches and Rhythm Sets
You can change Patches – including the Patches in each Part of a Performance – and
Rhythm Sets on the XV-5050 via MIDI Part.
In this example, after setting the send channel for the external MIDI device and the
XV-5050’s reception channel (Patch Rx Channel) to “1,” we’ll send a MIDI message
from the external MIDI device to select the XV-5050 Patch “PB:018 Slap Bass 1.”
1.
Use a MIDI cable to connect the MIDI OUT connector on the external
MIDI device to the XV-5050’s MIDI IN connector.
2.
Press [PATCH] to make its indicator light.
3.
Set the channel used for transmission by the external MIDI device and
the XV-5050’s reception channel to the same MIDI channel (see p. 19).
*A Factory Reset sets the reception channel in Patch mode to MIDI Channel 1.
4.
Send a Bank Select MSB (Control Number 0) value of “87” to the XV-
5050.
* If you want to select a Rhythm Set, send a value of “86.”
5.
Next, send a Bank Select LSB (Control Number 32) value of “65.”
6.
Send a Program Change with a value of “18.”
The Patch name appearing in the display changes to “PB:018 Slap Bass 1.”
* Each Patch or Rhythm Set has a corresponding Bank Select number and Program number,
as shown below.
Patches Bank Select number Program
number
Bank Number MSB LSB
US (User)
001–128 87 00 001–128
PA (Preset A) 001–128 87 64 001–128
PB (Preset B) 001–128 87 65 001–128
PC (Preset C) 001–128 87 66 001–128
PD (Preset D) 001–128 87 67 001–128
PE (Preset E) 001–128 87 68 001–128
PF (Preset F) 001–128 87 69 001–128
PG (Preset G) 001–128 87 70 001–128
PH (Preset H) 001–128 87 71 001–128
GM (GM2) 001–256 121 0– 001–128
XA (Expansion A) 001– 93 0– 001–
XB (Expansion B) 001– 93 0– 001–
A Factory Reset sets the
reception channel in Patch
mode to MIDI Channel 1.
Numbers for XA and XB
will be different depending
on the Wave Expansion
Board you’ve installed. For
more information, refer to
the manual for the SRX.
XV-5050_e.book 30 ページ 2003年6月27日 金曜日 午後3時14分
30


Need help? Post your question in this forum.

Forumrules
1

Forum

roland-xv5050

Reset search

  • my xv5050 power is of how can i repair the powerboard Submitted on 14-7-2024 at 03:57

    Reply Report abuse
  • my xv5050 power is of how can i erpaie the powerboad Submitted on 14-7-2024 at 03:53

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland XV5050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland XV5050 in the language / languages: English as an attachment in your email.

The manual is 6,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland XV5050

Roland XV5050 User Manual - Dutch - 183 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info