647722
94
Zoom out
Zoom in
Previous page
1/169
Next page
94
Establishing Settings for an Entire
XV-2020 (SYSTEM COMMON)
SYSTEM COMMON
Parameter Value Description
MASTER LEVEL 0–127 Adjusts the volume of the entire XV-2020.
MASTER TUNE 415.3–466.2 Hz Adjusts the overall tuning of the XV-2020. The setting is expressed as the fre-
quency played by the A4 key.
PATCH REMAIN
(Patch Remain Switch)
OFF, ON This specifies whether you want the notes that are sounding to remain (ON)
or turn off (OFF) when you select a new Patch or Rhythm Set in Patch mode.
In addition, when “ON” is selected, the Volume and Pan data, and the Key
Mode and other settings received via MIDI (CC 5, 7, 10, 65, 68, 71–74, RPN 0,
1, 2, MONO ON, POLY ON) are passed on.
MASTER KEY SHIFT -24–+24 Shifts the overall pitch of the XV-2020 in semitone steps.
CLOCK SOURCE
(System Clock Source)
INT, MIDI, USB Specifies the tempo clock of the system.
INT: The internal clock
MIDI: An external clock received via MIDI IN connector
USB: An external clock received via USB connector
TEMPO
(System Tempo)
20–250 Sets the system tempo. When Clock Source is set to “MIDI” or “USB,” the
tempo will synchronize to the clock messages received from an external de-
vice, so the tempo value will be ignored.
PERFORM CTRL CH
(Performance Control Channel)
1–16, OFF When changing Performances by MIDI messages from the external device,
set the transmit channel of the external device and this channel to the same
channel.
* When you perform a Factory Reset operation, Control Channel is reset to “16.”
PATCH RCV CH
(Patch/Rhythm Set Receive Channel)
1–16 Set this channel to use an external MIDI device (such as a MIDI keyboard) for
playing Patches and Rhythm Sets, or to have Patches or Rhythm Sets
changed as the result of MIDI messages.
RCV PC
(Receive Program Change Switch)
OFF, ON Specifies whether Program Change messages will be received (ON), or not
(OFF).
RCV BS
(Receive Bank Select Switch)
OFF, ON Specifies whether Bank Select messages will be received (ON), or not (OFF).
SYSTEM CTRL SRC 1–4
(System Control Source1–4)
OFF, CC01–31,
33–95, BEND,
AFTER
These settings allow you to choose four MIDI controllers for global use when
controlling the parameters of any Patch or Performance. The settings in each
Patch or Performance will determine whether the two controllers you choose
here will actually be used. In each Patch or Performance, you will also need
to specify the parameters to be controlled.
OFF: No controller is used.
CC01–95: Controller numbers 1–95 (except for 32)
BEND: Pitch Bend
AFTER: Aftertouch
94


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland XV-2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland XV-2020 in the language / languages: English as an attachment in your email.

The manual is 4,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info