647722
93
Zoom out
Zoom in
Previous page
1/169
Next page
93
Saving a Sound You Create
Saving a Sound You
Create
Transmitting Sound Settings
(XFER)
The act of transmitting Patch, Performance, Rhythm Set or System
data to an external MIDI device is called a “Bulk Dump.” You can
perform a bulk dump when two XV-2020s are connected to each
other, or when you wish to store Patch, Performance, Rhythm Set or
System data on an external MIDI device as a safety backup of your
XV-2020 data.
The following describes the relationship between the selected mode
and the data that is transmitted.
Patch Mode: Parameters for the currently selected Patch
Rhythm Mode: Parameters for the currently selected Rhythm
Set
Performance Mode: Parameters for the currently selected
Performance and the Patches and Rhythm Sets
assigned to its Parts
GM Mode: Bank Select and Program Changes are
transmitted not by Exclusive messages, but by
means of MIDI Channel messages. For more on
the MIDI Channel messages that are
transmitted, refer to the MIDI Implementation
( p. 136).
1. Select the Performance, Patch, Rhythm Set or GM mode
settings you wish to transfer.
2. While holding down [VOLUME], press [VALUE].
3. Turn [CATEGORY/BANK] to select “UTILITY (PIANO).”
4. Rotate [VALUE] until “dtr ( )” appears in the display.
5. When you press [VALUE], “Sur” flashes in the display, and
screen asking you to confirm whether or not you want to
transmit appears.
6. When you press [VALUE] once more, the data is
transmitted to the external MIDI device.
* To cancel the procedure, while holding down [VOLUME] and
pressing [VALUE].
93


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland XV-2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland XV-2020 in the language / languages: English as an attachment in your email.

The manual is 4,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info