647722

Roland XV-2020 Manual

47
Zoom out
Zoom in
Previous page
1/169
Next page
47
Creating a Patch
Creating a Patch
ANALOG FEEL
(Analog Feel Depth)
0–127 Specifies the depth of Analog Feel that is applied to the Patch. Traditional ana-
log synthesizers often exhibited a degree of instability in their tuning. The XV-
2020’s Analog Feel feature can simulate this characteristic.
CLOCK SOURCE
(Patch Clock Source)
PATCH, SYSTEM Selects the timing reference to be used by the Patch. The LFO cycle, M-FX
changes, phrase loop (break beats), and Tone delay time can be synchronized
to a clock, or tempo.
PATCH: Uses the Patch Tempo.
SYSTEM: Uses the global System Tempo or clock messages received from an
external sequencer.
TEMPO
(Patch Tempo)
20–250 Establishes the Patch’s tempo when Clock Source is set to “PATCH.”
* Clock messages for the Patch Tempo are not transmitted from the MIDI OUT con-
nector.
CUTOFF OFFSET -63–+63 Simultaneously lowers or raises the individual TVF cutoff frequency values of
the Tones in the Patch.
RES OFFSET
(Resonance Offset)
-63–+63 Simultaneously lowers or raises the individual TVF Resonance values of the
Tones in the Patch.
ATTACK TIME OFFSET -63–+63 Simultaneously lowers or raises the individual TVA ENVELOPE T1 values of
the Tones in the Patch.
RELEASE TIME OFFSET -63–+63 Simultaneously lowers or raises the individual TVA ENVELOPE T4 values of
the Tones in the Patch.
VELOCITY SENS OFFSET -63–+63 Simultaneously lowers or raises the individual TVF VELOCITY V-Cutoff and
TVA V-Sens values of the Tones in the Patch.
PRIORITY
(Voice Priority)
LAST, LOUDEST Determines how notes are managed when the XV-2020’s maximum polyphony
limit is exceeded (64 voices).
LAST: Gives priority to the last-played voices. Currently-sounding notes are
turned off in order, beginning with the first-played note.
LOUDEST: Gives priority to the voices with the loudest volume. Currently-
sounding notes are turned off beginning with the lowest-volume voice.
MONO/POLY
(Key Mode Assign)
MONO, POLY Sets how the Patch’s notes are played. The MONO setting is effective when
playing a solo instrument Patch such as sax or flute.
MONO: Only one note sounds at a time
POLY: Two or more notes can be played simultaneously.
LEGATO SW
(Legato Switch)
OFF, ON Turn this parameter on when you want to use the Legato feature and off when
you don’t. Legato is a function that works only when the Key Assign Mode is
MONO. When Legato is ON, pressing one key when another is already pressed
causes the currently playing note’s pitch to change to that of the newly pressed
key while continuing to sound. This can be effective when you wish to simulate
performance techniques such as a guitarist’s hammering on and pulling off
strings.
LEGATO RETRIGGER OFF, ON The setting determines whether sounds are replayed or not when performing
legato. Normally you will leave this parameter “ON.” When Delay Key follow
is set to OFF, if one key is pressed while another key is held down, only the
pitch changes, which with some waveforms may result in an unnatural sound.
Set this to “OFF” when performing wind and string phrases or when using
modulation with the mono synth keyboard sound.
* If the Legato Switch is “OFF,” this setting is ignored.
PITCH BEND RANGE UP 0–48 Specifies the pitch change that occurs when the Pitch Bend lever is moved fully
to the right (or up on some MIDI controllers).
PITCH BEND RANGE DOWN -48–0 Specifies the amount of pitch change that’s applied to the Patch’s pitch when
the Pitch Bend lever is moved fully left (or down on some MIDI controllers).
PORTAMENTO SW
(Portamento Switch)
OFF, ON Portamento is a function that causes the Patch’s pitch to change smoothly from
one note to the next note played. When the Key Mode Assign is MONO, this
can be effective in simulating performance techniques such as a violinist’s glis-
sando. Turn this switch on when you wish to use.
PORTAMENTO MODE NORMAL, LEGATO Chooses the way in which Portamento is applied.
NORMAL: Portamento is always applied.
LEGATO: Portamento is applied only for notes played legato (i.e., when you
press a second key before releasing the first.)
PORTAMENTO TYPE RATE, TIME Determines the way in which the pitch difference between the two notes affects
the time it takes to glide from one note to the next.
RATE: The time it takes depends on the distance between the two pitches.
TIME: The time it takes is constant, regardless of how far apart in pitch the
notes are.
Parameter Value Description
… 47 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland XV-2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland XV-2020 in the language / languages: English as an attachment in your email.

The manual is 4,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info