647722
46
Zoom out
Zoom in
Previous page
1/169
Next page
46
Creating a Patch
Patch Parameter
Tone-Related Settings
PATCH COMMON (Settings Common to the Entire Patch)
Parameter Value Description
TONE SWITCH OFF, ON Here’s how to turn on the Tones that you want to hear in a Patch. You can also use the on/off tech-
nique described in this section to audition an individual Tone by turning off all the other Tones in a
Patch.
TONE SELECT OFF, ON Selects the Tone to be edited.
Parameter Value Description
PATCH NAME space, A–Z, a–z, 0–9,
! “ # $ % & ‘ ( ) * + , - .
/ : ; < = > ? @ [ ¥ ] ^ _
` |
You can give a Patch a name of up to 12 characters. When using the XV editor,
click on the left side to name the Tone.
CATEGORY
(Patch Category)
PIANO, KEY&ORG,
GTR/BS, OCH/BRS,
SYN/PAD,
ETHNIC, RHY&SFX
Specifies the type, or “category” of the Patch. The Patch Finder uses this setting.
LEVEL
(Patch Level)
0–127 Specifies the volume of the Patch.
* You can specify the level of each Tone in a Patch using the Tone Level parameter
(TVA p. 59).
PAN
(Patch Pan)
L64–63R Sets the stereo position of the Patch. L64 pans the Patch all the way to the left, 0
is center and 63R pans it hard right.
* You can specify the pan setting for each Tone in a Patch using the Tone Pan param-
eter (TVA p. 60).
* While each Tone in a Patch has its own Pan position, the Patch pan setting shifts the
entire Patch—including all of its Tones—leftward or rightward
OUTPUT ASSIGN MFX, A, 1, 2, TONE Specifies the output destination for the Patch.
MFX: Sends the Patch into the Multi-Effects. The output destination is deter-
mined by the Multi-Effects output setting.
A: Output from OUTPUT.
1: Output from L.
2: Output from R.
TONE: Sends each Tone in the Patch to its programmed output destination.
OCTAVE SHIFT -3–+3 Sets the pitch of the Patch in units of an octave.
COARSE TUNE -48–+48 Adjusts the pitch of all of the Patch’s Tones simultaneously in semitone steps
over a range of +/-4 octaves.
FINE TUNE -50–+50 Adjusts the pitch of all of the Patch’s Tones simultaneously in 1-cent steps (1/
100th of a semitone) over a range of 1/2 semitones up or down.
STRETCH TUNE DEPTH OFF, 1, 2, 3 This setting allows you to apply “stretch tuning” to the Patch. Acoustic pianos
typically use stretch tuning, with their lower range slightly flatter and their
higher range slightly sharper than the actual mathematical tuning ratios dic-
tate. Stretch is therefore useful when programming a Patch intended to sound
like a real piano. With a setting of OFF, the Patch’s tuning is equal tempera-
ment. A setting of 3 produces the greatest difference in the pitch of the low and
high ranges. This diagram shows the pitch change relative to equal tempera-
ment that occurs in the low and high ranges. Stretch has a subtle effect on the
way in which chords resonate.
1
2
3
OFF
2
1
OFF
3
Pitch difference from
equal temperament
Parameter value
Low note range
High note range
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland XV-2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland XV-2020 in the language / languages: English as an attachment in your email.

The manual is 4,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info