Manual Roland XP-30 (page 76 of 216) (English)

647744

Zoom out

Zoom in

1/216

Chapter 3. Creating Your Own Sounds

■ Modifying Waveform (WAVE)

This group contains parameters related to the basic

waveform (Wave) of the Tone.

WAVE

Group (Wave Group)

Select the Group of the Wave.

INT-A, B: Internal A, B

EXP-A–E: Wave Expansion Boards A–E

* It is not possible to select a Group of a Wave Expansion Board

that is not installed.

Number (Wave Number)

Select the Wave number. The name of the Wave will be

displayed in parentheses ( ).

Gain (Wave Gain)

Adjust the gain (volume boost) of the Wave. The setting

range is -6–+12 dB, in steps of 6 dB. An increase of 6 dB

doubles the gain. When using the Booster to distort the

sound, it is effective to use the maximum Gain setting.

Switch (Tone Switch)

When you wish to use the Tone, set this ON. When not using

the Tone, set this OFF. In order to make best use of the

available number of simultaneous voices, unused Tones

should be turned off.

* When you use TONE SWITCH [1]–[4] to turn Tones on/off,

this is the parameter that is being set.

FXM (Frequency cross modulation)

FXM is a function that uses frequency modulation to add

new harmonic components to the sound. It can be used as a

simple ring modulator in order to add a metallic flavor.

Switch (FXM Switch)

When you wish to use FXM turn this ON. If not, turn it OFF.

Color (FXM Color)

Select one of four ways in which FXM will use frequency

modulation.

Depth (FXM Depth)

Adjust the depth of the frequency modulation created by

FXM.

TONE DELAY

This parameter produces a time delay from the moment the

key is pressed (or released) until when the Tone begins to

sound. Since you can adjust the timing of each Tone, you can

create effects in which pressing a single key produces two or

more sounds at different times.

* If you do not wish to use Tone Delay, set Mode to NORMAL

and Delay Time to 0.

Mode (Tone Delay Mode)

Select the way in which the Tone will sound.

NORMAL: The Tone will sound after the specified

Delay Time.

fig.3-32.e

HOLD:

If the key is pressed for longer than the

specified Delay Time, the Tone will sound after

the Delay Time. If the key is released earlier

than the Delay Time, the Tone will not sound.

fig.3-33.e

PLAYMATE:

If 2 seconds or more pass before the next key is

pressed, the Tone will sound after the Delay

Time. If less than 2 seconds pass before the next

key is pressed, that interval will become the

Delay Time after which the Tone will sound.

CLOCK-SYNC:

Synchronize the Delay Time to either the Patch

Tempo (PATCH/COMMON/PATCH

CLOCK), the Performance Tempo

(PERFORM/COMMON/PERFORM CLOCK),

or the tempo clock of the XP-30’s system.

If you want to use a fixed tempo in Patch

mode (Tempo parameter setting), set the

Source parameter (PATCH/COMMON/

PATCH CLOCK) to PATCH and set the

desired tempo.

If you want to use the system’s tempo clock

in Patch mode, set the Source parameter

(PATCH/COMMON/PATCH CLOCK) to

SYSTEM.

If you want to use a fixed tempo in

Performance mode (Tempo parameter

setting), set the Source parameter

(PERFORM/COMMON/PERFORM

CLOCK) to PERFORM and set the desired

tempo.

If you want to use the system’s tempo clock

in Performance mode, set the Source

parameter (PERFORM/COMMON/

PERFORM CLOCK) to SYSTEM.

release key

Delay Time

press key

release key

Delay Time

Tone does

not sound

press key

release key press key

Delay

Time

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Roland XP-30 in the language / languages: English as an attachment in your email.

The manual is 5,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Roland XP-30 Manual

Product: