647744
71
Zoom out
Zoom in
Previous page
1/216
Next page
71
Chapter 3. Creating Your Own Sounds
Chapter 3
The display will graphically indicate the selected Structure.
The symbols displayed have the following meanings.
W1 (WG1), W2 (WG2), F1 (TVF1), F2 (TVF2), A1 (TVA1), A2
(TVA2), B (booster), R (ring modulator)
* If you select a Tone while in the Structure display, the Tone that
is paired with the selected Tone will also be selected.
* If a Structure 2–10 is selected, turning off one Tone will cause
the other Tone to be connected in the simple order of WG/TVF/
TVA.
Booster (Booster Gain)
If the Type parameter has been set to 3 or 4, you can adjust
how strongly the Booster will function. The Booster amplifies
the incoming signal, causing it to distort. This creates an
effect similar to the distortion often used on an electric
guitar.
Setting Effects for a Patch
(EFFECTS)
This group contains settings for the Multi-Effects/Chorus/
Reverb effects used by a Patch.
* If an “x” mark is displayed at the right of the display name, the
effect for that display has been turned off. Turn the
corresponding effect on before you make settings (p. 62).
OUTPUT
These parameters specify how the output of each Tone will
be sent to the effects.
* When the Type parameter (PATCH/COMMON/STRUCT) has
a setting of 2–10, the outputs of Tones 1 (3) and 2 (4) will be
combined with Tone 2 (4). This means that the setting for Tone
1 (3) will be ignored.
Output Assign (Output Assign/Output Level)
Select whether or not the output of each Tone will be sent
through Multi-Effects, and adjust the volume of each Tone.
MIX: Output the Tone to the OUTPUT jack without passing
through Multi-Effects.
EFX: Output the Tone to the OUTPUT jack through Multi-
Effects.
* If you select MIX, the settings in the PATCH EFX OUT
display (PATCH/EFFECTS) will be ignored.
Chorus (Chorus Send Level)
Adjust the amount of Chorus for each Tone.
Reverb (Reverb Send Level)
Adjust the amount of Reverb for each Tone.
PATCH EFX TYPE
Specify the Patch Multi-Effects.
Type (EFX Type)
Select the type of Multi-Effects. For details refer to Multi-
Effects Types (EFX Parameter) (p. 93).
PATCH EFX PRM (Patch EFX Parameters)
Set the various parameters of the selected EFX type. For
details refer to Multi-Effects Types (EFX Parameter) (p.
93).
Ring Modulator
The Ring Modulator multiplies two Tones together,
creating a new sound that includes overtones
(inharmonic overtones) that were not present in either
of the two original Tones. Since the pitch difference
between the two Tones will change the overtone
structure, the result will be an unpitched metallic
sound. This is especially suitable for creating bells and
other metallic sounds.
fig.3-26
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland XP-30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland XP-30 in the language / languages: English as an attachment in your email.

The manual is 5,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info