674604

Roland TR-8S - RHYTHM PERFORMER Manual

15
Zoom out
Zoom in
Previous page
1/24
Next page
15
Editing a Kit or Instrument
Master Effect (MASTER FX)
Here’s how to apply the master effect to the kit.
1. Hold down the [SHIFT] button and press the
MASTER FX [ON] button.
The KIT EDIT screen’s MASTER EFX items are shown.
2. Select a master effect type.
The editable parameters differ for each effect.
&
For details, refer to “Reference Manual” (PDF).
MEMO
You can use the MASTER FX [CTRL] knob to edit the assigned
parameter.
3. Press the [KIT] button.
Exit the screen.
Assigning Parameters to the [CTRL] Knobs
(CTRL SELECT)
You can assign parameters to the [CTRL] knobs of the instrument
edit section, and control those parameters while the pattern plays
back.
1. Press the [CTRL SELECT] button to make it light.
The CTRL SELECT screen appears.
2. Use the [VALUE] knob to select a parameter.
The same parameter is selected for all [CTRL] knobs.
3. Press the [CTRL SELECT] button once again.
The [CTRL SELECT] button goes dark, and you exit the CTRL
SELECT screen.
Assigning a Different Function for Each
Instrument to the [CTRL] Knob
1. While holding down the [CTRL SELECT] button,
press a [BD]–[RC] button.
The parameter that’s assigned to the [CTRL] knob is displayed.
2. Use the [VALUE] knob to select a parameter.
3. Press the [CTRL SELECT] button.
The [CTRL SELECT] button goes dark, and you exit the screen.
MEMO
You can also select from the assignable parameters by holding
down the [CTRL SELECT] button and directly operating the
[CTRL] knob.
5 The assignment that you make is saved in the “User”
parameter which you can select in step 2 of “Assigning
Parameters to the [CTRL] Knobs (CTRL SELECT)” (p. 15).
Playing Multiple Instruments Layered
(GROUPING for Layer)
You can create a group of multiple instruments and play their layered
sound with a single note.
You can use grouped master instruments in the following ways.
The slave instrument follows the master instrument.
5 Pattern input in “TR-REC”
5 Pad performance in “INST PLAY”
5 Pad recording in “INST REC”
Grouping Instruments
1. In the KIT Edit screen, long-press the [BD]–[RC]
button that you want to specify as the master
instrument.
The INST GROUP screen appears.
2. While holding down the button that you pressed in
step 1, press the [BD]–[RC] button that you want to
specify as the slave instrument.
The instruments that you selected as the master instrument and
the slave instrument are grouped.
MEMO
5 During TR-REC, when you press a grouped [BD]–[RC] button,
the [BD]–[RC] button of the master instrument (
) lights and
the [BD]–[RC] button of the slave instrument ( ) blinks.
5 During INST PLAY/INST REC, pressing a pad [1]–[11] of a
grouped slave instrument does not produce sound.
5 If you press the [MUTE] button, the same group’s master
instrument’s [BD]–[RC] button lights and the slave
instrument’s [BD]–[RC] button blinks.
Selecting an Instrument’s Tone (INST)
Instrument’s tones of the currently selected kit are selected
individually.
1. Press the [INST] button.
The [INST] button and the [BD]–[RC] button (that had been
selected for [TR-REC]) are lit, and [the INST screen appears.
2. Use the [VALUE] knob to select the instrument’s
tone.
MEMO
To switch categories, hold down the [SHIFT] button and turn
the [VALUE] knob.
3. Press the [INST] button once again.
Exit the INST screen.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland TR-8S - RHYTHM PERFORMER at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland TR-8S - RHYTHM PERFORMER in the language / languages: English as an attachment in your email.

The manual is 2,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info