674604

Roland TR-8S - RHYTHM PERFORMER Manual

13
Zoom out
Zoom in
Previous page
1/24
Next page
13
INST-PLAY (Performing)
You can use pads [1] (BD)–[11] (RC) to perform in real time.
Your performance does not modify the pattern.
1. Press the [INST PLAY] button.
2. Perform using pads [1] (BD)–[11] (RC).
Playing Sub Steps
Here’s how to play sub steps.
This lets you play duplets, triplets, and quadruplets.
1. Press the [SUB] button.
2. Press the pad [1]–[16] that will play sub steps.
MEMO
By holding down the [SUB] button and turning the [VALUE]
knob you can choose from 1/2, 1/3, or 1/4 as the number of
step divisions.
You can also play a sub step by holding down the [SUB] button
and pressing a pad [1]–[16].
Performing a Flam
Here’s how to perform a flam on an instrument’s tone.
1. Hold down the [SHIFT] button and press the [SUB]
button to set SUB STEP to FLAM.
2. Press a pad [1] (BD)–[11] (RC).
This lets you perform a flam on the instrument’s tone.
Performing Weak Beats (WEAK BEATS)
1. While holding down the [SHIFT] button, press a
pad [1] (BD)–[11] (RC).
This lets you perform weak beats.
Performing Alternate Sounds (ALT INST)
For sounds whose name includes a “/” character, such as 707Bass1/2,
you can perform alternate sounds.
1. While holding down an instrument select button
[BD]–[RC], press a pad [1] (BD)–[11] (RC).
Performing a Roll (ROLL)
Here’s how to perform a roll on an instrument’s tone.
1. While holding down a pad [12]–[13], press a pad
[1]–[11].
This lets you perform a roll on the instrument’s tone.
Alternate method
1. While holding down the [INST PLAY] button, press
a pad [12]–[13].
Pad [12]–[13] is lit.
2. Press a pad [1]–[11].
This lets you perform a roll on the instrument’s tone.
3. To stop playing the roll, press the pad [12]–[13]
once again.
Roll speed
Pad Explanation
Pad [12] Sixteenth note
Pad [13] Thirty-second note
Pad [12] + [13] Sixty-fourth note
Editing the Pattern Settings (Pattern Setting)
Here’s how to specify the kit and tempo that are used by a pattern.
1. Hold down the [SHIFT] button and press the [PTN
SELECT] button.
The PTN SETTING screen appears.
2. Select a parameter.
2-1. Use the [VALUE] knob to select a parameter.
2-2. Press the [ENTER] button.
3. Modify values.
3-1. Use the [VALUE] knob to edit the parameter value.
3-2. Press the [ENTER] button.
Return to the parameter selection (step 2).
4. Press the [PTN SELECT] button.
You exit the PTN SETTING screen.
PTN SETTING parameter
Parameter Explanation
KIT:SW
Turn this on if you want to use the kit that’s
selected by the “KIT:Number” parameter.
KIT:Number Selects the kit used by the pattern.
Tempo Specifies the tempo of the pattern.
Scale Selects the scale.
Shuffle Specifies the amount of shuffle (bounce).
Flam Spacing Specifies the flam spacing.
ScatterType Selects the type of scatter.
ScatterDepth Adjusts the depth of scatter.
NAME Specifies the name of the pattern.
&
For details, refer to “Reference Manual” (PDF).
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland TR-8S - RHYTHM PERFORMER at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland TR-8S - RHYTHM PERFORMER in the language / languages: English as an attachment in your email.

The manual is 2,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info